Instructions / Assembly

www.iamzchef.com Email: [e-mail] Whatsapp:[phone] Facebook: amzchefappliance
How to stop cooking?
Under working status, press ON/OF button of selected cooking zone , the selected zone
would stop heating.
Beware of hot surfaces
When the surface temperature exceeds 55°C/131℉ an "H" will be displayed indicating that
the cooking zone is too hot to touch.It will disappear when the surface has cooled down to a
safe temperature. It can also be used as an energy saving function if you want to heat further
pans, use the hotplate that is still hot.
BOOST function
During the working, once you press the button Boost, the working power would change to
highest
When the unit works with BOOST status, press - button, the working power would revert to
level 9; if you don’t do any operation, the working power also will revert to level 9 automati-
cally after 10 minutes .
Warm Function
To keep food warm, you could use the left front zone (zone 4) or left rear zone (zone 5) .
During the working, adjust the working level to 1 first, then press - button, the display will
show A representing the unit works with warm mode.
Melt Function
This function could be used on the right rear zone(zone 1) or right front zone(zone 3). During
the working, adjust the working level to 1 first, then press - button, the display will show A
representing the unit works with melt mode. This function could defrost the food.
Simmer Function
This function could be used on the middle zone(zone 2) . During the working, adjust the
working level to 1 first, then press - button, the display will show A representing the unit
works with simmer mode.
10