Instructions / Assembly

www.iamzchef.com Email: [e-mail] Whatsapp:[phone] Facebook: amzchefappliance
Timer Function
You can program a cooking time between 1 and 99 minutes after setting the power.
1.Press the Timer button
-The corresponding indicator light of selected working zone flashes
- ”00” (default time) appears in the display
2. Set the desired time using the + and - button .
-Touch +/- button once to increase/decrease the time by 1 minute.
-Hold +/- button to increase/decrease the time by 10 minutes.
3.When finished the setting, the count-down of the set time starts. The display indicates the
remaining time. The timer indicator flashes for 5 seconds. As soon as the selected cooking
time of the burner of your choice has elapsed, the burner of relevant cooking zone beeps and
then switches off automatically.
When more burners work together, the time of display showed is the shortest remaining
time among all timers.
4.During cooking with timer mode, you could press Timer button ,and choose the relevant
working zone(corresponding indicator light flashes), then the display would show the
remained working time of selected zone.
5.During cooking, you can cancel the timer at any time.
How to use the safety lock funtion
To prevent accidental changes to a selection, especially by children, you can lock the
buttons on the control panel of the burner of your choice(except for the On/Off button）.
To lock the button, hold the lock button for 3 seconds, the buzzer beeps
once, the indicator light comes
on. The hob will then no longer react to changes.
To unlock the button, hold the lock button for 3 seconds, the buzzer beeps
once,the indicator light is
off, you can proceed operation as normal
Pause function
1.During cooking, press the " " button,all burners’ heating will pause, the indicator
light comes on,the code ‖ appears in relevant LED display.
2.Under Pause state, press " " button,all burners will resume to work,the indicator light
is off, all burners will revert to previous working status.
3.During Pause status, When you do not press " " button within 10 minutes, the
appliance will switch off automatically.
Setting the timer to turn more than one cooking zone off
Ee.g. zone 1# setting time of 3 minutes, zone 2# setting time of 6 minutes, the timer indica-
tor shows “3”.
NOTE: The flashing red dot next to power level indicator means the timer indicator is
showing time of the heating zone.
If you want to check the set time of other heating zone, touch the heating zone selection
control. The timer will indicate its set time.
(set to 6 minutes)
(set to 3 minutes)
12