Instructions / Assembly

www.iamzchef.com Email: [e-mail] Whatsapp:[phone] Facebook: amzchefappliance
Pans do not become
hot and appears in
the display.
The induction hob or
a cooking zone has
turned itself off
unexpectedly, a tone
sounds and an error
code is displayed
(typically alternating
with one or two
digits in the cooking
timer display).
The induction hob cannot
detect the pan because it is
not suitable for induction
cooking.
The induction hob cannot
detect the pan because it is
too small for the cooking zone
or not properly centred on it.
Use cookware suitable for induction
cooking. See section `Choosing the
right cookware`.
Centre the pan and make sure that
its base matches the size of the
cooking zone.
Technical fault.
Please note down the error
letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.
Code Possible causes Measures
*Lightning surge voltage protection: When heating the induction cooktop, use a standard lightning
surge generator and apply a 1.2/50 µ s lightning surge voltage of 1200V. Test in any phase for 10
consecutive minutes. The induction cooktop can heat normally without damaging the circuit.
*Anti interference performance: When the electromagnetic furnace is working, it can withstand the
interference of 1200V fast transient pulse group (IEC6100-4-4-2004 ), and the electromagnetic
furnace can heat normally without crashing, stopping, resetting, and circuit damage.
*Overcurrent protection: When the working current exceeds the set value, the circuit automatically
adjusts and the constant input current is within the safe range. When there is a short circuit in the
main circuit and overcurrent occurs, the fuse is used for fuse protection.
15
U