Datasheet

AD7329 Data Sheet
Rev. B | Page 8 of 40
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 4.
Parameter Rating
V
DD
to AGND, DGND −0.3 V to +16.5 V
V
SS
to AGND, DGND +0.3 V to −16.5 V
V
DD
to V
CC
V
CC
− 0.3 V to +16.5 V
V
CC
to AGND, DGND −0.3 V to +7 V
V
DRIVE
to AGND, DGND −0.3 V to +7 V
AGND to DGND −0.3 V to +0.3 V
Analog Input Voltage to AGND
1
V
SS
− 0.3 V to V
DD
+ 0.3 V
Digital Input Voltage to DGND −0.3 V to +7 V
Digital Output Voltage to GND −0.3 V to V
DRIVE
+ 0.3 V
REF
IN
to AGND −0.3 V to V
CC
+ 0.3 V
Input Current to Any Pin
Except Supplies
2
±10 mA
Operating Temperature Range
−40°C to +85°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
TSSOP Package
θ
JA
Thermal Impedance 128°C/W
θ
JC
Thermal Impedance 42°C/W
Pb-Free Temperature, Soldering
Reflow 260(0)°C
ESD 2.5 kV
1
If the analog inputs are driven from alternative V
DD
and V
SS
supply circuitry,
Schottky diodes should be placed in series with the V
DD
and V
SS
supplies of
the AD7329 (see the Power Supply Configuration section).
2
Transient currents of up to 100 mA do not cause SCR latch-up.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION