Datasheet

AD9230-11
Rev. 0 | Page 12 of 28
Pin No. Mnemonic Description
3 D3/D9− D3/D9 Complement Output Bit.
4 D3/D9+ D3/D9 True Output Bit.
5 D4/D10− (MSB) D4/D10 Complement Output Bit (MSB).
6 D4/D10+ (MSB) D4/D10 True Output Bit (MSB).
9 OR−
OR Complement Output Bit. This pin is disabled if Pin 21 is reconfigured through the SPI to be
OR−.
10 OR+ OR True Output Bit. This pin is disabled if Pin 22 is reconfigured through the SPI to be OR+.
11 to 20 DNC Do Not Connect.
21 DNC/(OR−)
Do Not Connect. This pin can be reconfigured as the Overrange Complement Output Bit
through the serial port register.
22 DNC/(OR+)
Do Not Connect. This pin can be reconfigured as the Overrange True Output Bit through the
serial port register.
1
AGND and DRGND should be tied to a common quiet ground plane.