Datasheet

Data Sheet AD9516-3
Rev. C | Page 61 of 80
Reg.
Addr.
(Hex)
Bits Name Description
0x016 [2:0] Prescaler P Prescaler: DM = dual modulus, and FD = fixed divide.
2 1 0 Mode Prescaler
0 0 0 FD Divide-by-1.
0 0 1 FD Divide-by-2.
0 1 0 DM Divide-by-2 (2/3 mode).
0 1 1 DM Divide-by-4 (4/5 mode).
1 0 0 DM Divide-by-8 (8/9 mode).
1 0 1 DM Divide-by-16 (16/17 mode).
1 1 0 DM Divide-by-32 (32/33 mode) (default).
1 1 1 FD Divide-by-3.
0x017 [7:2] STATUS pin Selects the signal that is connected to the STATUS pin.
control
7 6 5 4 3 2
Level or
Dynamic
Signal
Signal at STATUS Pin
0 0 0 0 0 0 LVL Ground (dc) (default).
0 0 0 0 0 1 DYN N divider output (after the delay).
0 0 0 0 1 0 DYN R divider output (after the delay).
0 0 0 0 1 1 DYN A divider output.
0 0 0 1 0 0 DYN Prescaler output.
0 0 0 1 0 1 DYN PFD up pulse.
0
0
0
1
1
0
DYN
PFD down pulse.
0
X
X
X
X
X
LVL
Ground (dc); for all other cases of 0XXXXX not specified above.
The selections that follow are the same as REFMON.
1 0 0 0 0 0 LVL Ground (dc).
1 0 0 0 0 1 DYN REF1 clock (differential reference when in differential mode).
1 0 0 0 1 0 DYN REF2 clock (not available in differential mode).
1 0 0 0 1 1 DYN Selected reference to PLL (differential reference when in differential mode).
1 0 0 1 0 0 DYN Unselected reference to PLL (not available in differential mode).
1 0 0 1 0 1 LVL
Status of selected reference (status of differential reference); active
high.
1 0 0 1 1 0 LVL
Status of unselected reference (not available in differential mode);
active high.
1 0 0 1 1 1 LVL Status REF1 frequency (active high).
1 0 1 0 0 0 LVL Status REF2 frequency (active high).
1 0 1 0 0 1 LVL (Status REF1 frequency) AND (status REF2 frequency).
1 0 1 0 1 0 LVL (DLD) AND (status of selected reference) AND (status of VCO).
1 0 1 0 1 1 LVL Status of VCO frequency (active high).
1 0 1 1 0 0 LVL Selected reference (low = REF1, high = REF2).
1 0 1 1 0 1 LVL Digital lock detect (DLD); active high.
1 0 1 1 1 0 LVL Holdover active (active high).
1
0
1
1
1
1
LVL
LD pin comparator output (active high).
1
1
0
0
0
0
LVL
VS (PLL supply).
1
1
0
0
0
1
DYN
REF1 clock
(differential reference when in differential mode).
1
1
0
0
1
0
DYN
REF2 clock
(not available in differential mode).
1 1 0 0 1 1 DYN
Selected reference to PLL
(differential reference when in differential mode).
1 1 0 1 0 0 DYN
Unselected reference to PLL
(not available when in differential mode).
1 1 0 1 0 1 LVL Status of selected reference (status of differential reference); active low.
1 1 0 1 1 0 LVL Status of unselected reference (not available in differential mode); active low.
1 1 0 1 1 1 LVL Status of REF1 frequency (active low).
1 1 1 0 0 0 LVL Status of REF2 frequency (active low).
1 1 1 0 0 1 LVL
(Status of REF1 frequency) AND (status of REF2 frequency)
.
1 1 1 0 1 0 LVL
(DLD) AND (status of selected reference) AND (status of VCO)
.
1 1 1 0 1 1 LVL Status of VCO frequency (active low).
1 1 1 1 0 0 LVL Selected reference (low = REF2, high = REF1).
1 1 1 1 0 1 LVL Digital lock detect (DLD) (active low).
1
1
1
1
1
0
LVL
Holdover active (active low).
1 1 1 1 1 1 LVL LD pin comparator output (active low).