Datasheet

AD9762
–5–
REV. B
PIN CONFIGURATION
14
13
12
11
17
16
15
20
19
18
10
9
8
1
2
3
4
7
6
5
TOP VIEW
(Not to Scale)
28
27
26
25
24
23
22
21
AD9762
NC = NO CONNECT
(MSB) DB11
DB10
DB9
DB8
DB7
DB6
DB5
DB4
DB3
DB2
DB1
DB0
NC
NC
CLOCK
DVDD
DCOM
NC
AVDD
COMP2
IOUTA
IOUTB
ACOM
COMP1
FS ADJ
REFIO
REFLO
SLEEP
PIN DESCRIPTIONS
Pin No. Name Description
1 DB11 Most Significant Data Bit (MSB).
2–11 DB10–DB1 Data Bits 1–10.
12 DB0 Least Significant Data Bit (LSB).
13, 14, 25 NC No Internal Connection.
15 SLEEP Power-down Control Input. Active High. Contains active pull-down circuit, thus may be left unterminated if
not used.
16 REFLO Reference Ground when Internal 1.2 V Reference Used. Connect to AVDD to disable internal reference.
17 REFIO Reference Input/Output. Serves as reference input when internal reference disabled (i.e., Tie REFLO to
AVDD). Serves as 1.2 V reference output when internal reference activated (i.e., Tie REFLO to ACOM).
Requires 0.1 µF capacitor to ACOM when internal reference activated.
18 FS ADJ Full-Scale Current Output Adjust.
19 COMP1 Bandwidth/Noise Reduction Node. Add 0.1 µF to AVDD for optimum performance.
20 ACOM Analog Common.
21 IOUTB Complementary DAC Current Output. Full-scale current when all data bits are 0s.
22 IOUTA DAC Current Output. Full-scale current when all data bits are 1s.
23 COMP2 Internal Bias Node for Switch Driver Circuitry. Decouple to ACOM with 0.1 µF capacitor.
24 AVDD Analog Supply Voltage (+2.7 V to +5.5 V).
26 DCOM Digital Common.
27 DVDD Digital Supply Voltage (+2.7 V to +5.5 V).
28 CLOCK Clock Input. Data latched on positive edge of clock.