Datasheet

ADA4412-3
Rev. 0 | Page 4 of 16
V
S
= ±5 V, @ T
A
= 25°C, V
O
= 1.4 V p-p, R
L
= 150 Ω, unless otherwise noted.
Table 2.
Parameter Test Conditions/Comments Min Typ Max Unit
OVERALL PERFORMANCE
Offset Error Input referred, all channels 10 25 mV
Offset Adjust Range Input referred ±500 mV
Input Voltage Range, All Inputs V
S−
− 0.1 V
S+
− 2.0 V
Output Voltage Swing, All Outputs Positive swing V
S+
− 0.33 V
S+
− 0.24 V
Negative swing V
S−
+ 0.24 V
S−
+ 0.33 V
Linear Output Current per Channel 30 mA
Integrated Voltage Noise, Referred to Input All channels 0.50 mV rms
Filter Input Bias Current All channels 6.3 μA
Total Harmonic Distortion at 1 MHz F
C
= 36 MHz, F
C
= 18 MHz/F
C
= 9 MHz 0.01/0.03 %
Gain Error Magnitude 0.04 0.50 dB
FILTER DYNAMIC PERFORMANCE
−1 dB Bandwidth Cutoff frequency select = 36 MHz 30.0 MHz
Cutoff frequency select = 18 MHz 15.5 MHz
Cutoff frequency select = 9 MHz 8.0 MHz
−3 dB Bandwidth Cutoff frequency select = 36 MHz 34 36 MHz
Cutoff frequency select = 18 MHz 17 19 MHz
Cutoff frequency select = 9 MHz 8 9 MHz
Out-of-Band Rejection f = 75 MHz −31 −42 dB
Crosstalk f = 5 MHz, F
C
= 36 MHz −62 dB
Propagation Delay f = 5 MHz, F
C
= 36 MHz 19 ns
Group Delay Variation Cutoff frequency select = 36 MHz 7 ns
Cutoff frequency select = 18 MHz 12 ns
Cutoff frequency select = 9 MHz 24 ns
Differential Gain NTSC, F
C
= 9 MHz 0.04 %
Differential Phase NTSC, F
C
= 9 MHz 0.16 Degrees
CUTOFF CONTROL INPUT PERFORMANCE
Input Logic 0 Voltage 0.8 V
Input Logic 1 Voltage 2.0 V
Input Bias Current 10 15 μA
DISABLE PERFORMANCE
DISABLE Assert Voltage V
S+
− 0.5 V
DISABLE Assert Time 75 ns
DISABLE Deassert Time 125 ns
DISABLE Input Bias Current 35 μA
Input-to-Output Isolation—Disabled f = 10 MHz 90 dB
POWER SUPPLY
Operating Range 4.5 12 V
Quiescent Current 57 60 mA
Quiescent Current—Disabled 10 150 μA
PSRR, Positive Supply All channels 66 74 dB
PSRR, Negative Supply All channels 59 62 dB