Use Instructions
Table Of Contents
- GLOSSARY & ACRONYMS
- PART 1. GENERAL SYSTEM INFORMATION
- 2. INDICATIONS AND CONTRAINDICATIONS FOR USE
- 3. WARNINGS AND PRECAUTIONS
- CAUTION
- 6. BASELINE MEASUREMENT PREPARATION AND DEVICE SETUP
- 8. THE ALIGNMENT TOOL
- PART 3. AT-HOME CPM SYSTEM USE
- PART 4. LIGHTS, SOUNDS, AND TROUBLESHOOTING
- 12. CPM DEVICE LIGHTS AND SOUNDS
- 13. BASE STATION INDICATIONS
- 14. BUTTON PRESSES
- 15. GENERAL TROUBLESHOOTING / FAQS
- 15.1 Physician Q&As
- Q: No data from my patient is appearing on the server, but after getting in touch with the patient, they say that they have been taking measurements consistently with no issue and their device is connected to a plugged- in Base Station.
- Q: No size of the CPM Device fits my patient.
- Q: I initiated a patient mode measurement while trying to put the device into Bluetooth pairing mode and now I can’t pair the CPM Device to the Mobile App.
- Q: How do patients get more adhesives when they run out?
- Q: Can the CPM System be used near other electronic or medical equipment such as telephones, televisions, computers, etc.?
- Q: Is data secure when transmitting from the CPM Device to the Mobile App, the Device to the Base Station, or the Base Station to the Cloud platform?
- 15.2 Patient Q&As
- Q: The CPM Device is not lighting up when plugged into the Base Station to charge.
- Q: Nothing happens when I am trying to start a measurement and/or the button is pressed on the CPM Device.
- Q: The device visually does not stick well to my body or is obviously peeling up.
- Q: I lost the clear protective liners for covering the adhesive.
- Q: I pressed the button accidentally/too early and a measurement started before the device was on my body. How do I get the device to stop beeping?
- Q: The CPM Device continues to beep, indicating there are errors, during a measurement.
- Q: Can I shower with the CPM Device or get it wet?
- Q: Can I travel with the CPM System?
- Q: A piece or part broke off the device, base station, or alignment tool.
- Q: What do I do if I think I am having a medical emergency or decompensation event?
- 15.1 Physician Q&As
- PART 5. CLEANING AND MAINTENANCE
- PART 6. SYSTEM SPECIFICATIONS
- PART 7. SYMBOLS GLOSSARY
26
Version C
Clinician Instructions for Use – Device and Mobile Application
C
6)
A popup window will list devices in range. Select “Assign Device
to Patient” and select the appropriate device from the list using
the Device ID printed on the back of the CPM Device.
7)
The message “Device assigned and connected!” should display
on the screen.
7.
IN-CLINIC SETUP AND BASELINE
Before
the measurement…
The patient should remove their shirt and/or bra.
Apply an adhesive disposable to the CPM Device. See Replacing the Adhesives on the device on page 37 for
instructions on how to place adhesive disposables on the CPM Device.
Remove the clear liners from the skin side of the device and
place them back into the Base Station
.
IMPORTANT
Ensure that the battery charge is greater than 20% before proceeding.
IMPORTANT
Correct placement of the CPM Device is at your (the clinician’s) discretion. You must achieve
ideal placement and data quality for the Baseline reading, as it will act as a baseline for the cloud
analytics as well as training for patients.
IMPORTANT
A Baseline is required for measurements to appear on the web application.
IMPORTANT
Always place liners back into the Base Station during measurements.