Datasheet

ADE9153A Data Sheet
Rev. 0 | Page 8 of 50
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 4.
Parameter Rating
VDD to AGND/DGND −0.3 V to +3.96 V
Analog Input Voltage to AGND/DGND,
IAP, IAN, IBP, IBN, VP, VN
1
−0.75 V to +2.2 V
Reference Input Voltage to AGND/DGND −0.3 V to +2.2 V
Digital Input Voltage to AGND/DGND −0.3 V to +3.96 V
Digital Output Voltage to AGND/DGND −0.3 V to +3.96 V
Operating Temperature
Industrial Temperature Range −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Lead Temperature (Soldering, 10 sec)
2
260°C
Electrostatic Discharge (ESD)
Human Body Model (HBM) 4 kV
Machine Model (MM) 200 V
Field Induced Charged Device Model
(FICDM)
1.25 kV
1
The rating of −0.75 V on the analog input pins is limited by protection
diodes inside the ADE9153A. These pins were tested with 7.5 mA going to
the pin to simulate a 30× overcurrent condition on the channel, based on
the test circuit antialiasing resistor of 150 Ω.
2
Analog Devices, Inc., recommends that reflow profiles used in soldering
RoHS-compliant devices conform to J-STD-020D.1 from JEDEC. Refer to
JEDEC for the latest revision of this standard.
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
THERMAL RESISTANCE
Thermal performance is directly linked to printed circuit board
(PCB) design and operating environment. Careful attention to
PCB thermal design is required.
θ
JA
and θ
JC
are specified for the worst-case conditions, that is, a
device soldered in a circuit board for surface-mount packages.
Table 5. Thermal Resistance
Package Type θ
JA
1
θ
JC
2
Unit
CP-32-12
3
27.83 2.10 °C/W
1
The θ
JA
measurement uses a 2S2P JEDEC test board.
2
The θ
JC
measurement uses a 1S0P JEDEC test board.
3
All thermal measurements comply with JESD51.
ESD CAUTION
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.