Datasheet

ADG621/ADG622/ADG623
Rev. B | Page 5 of 12
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter Rating
V
DD
to V
SS
13 V
V
DD
to GND −0.3 V to +6.5 V
V
SS
to GND +0.3 V to –6.5 V
Analog Inputs
1
V
SS
– 0.3 V to V
DD
+ 0.3 V
Digital Inputs
1
–0.3 V to V
DD
+ 0.3 V or 30 mA,
whichever occurs first
Peak Current, S or D
100 mA (pulsed at 1 ms,
10% duty cycle maximum)
Continuous Current, S or D 50 mA
Operating Temperature Range
Industrial (B Version)
–40°C to +85°C
Storage Temperature Range –65°C to +150°C
Junction Temperature 150°C
MSOP Package
θ
JA
Thermal Impedance 206°C/W
θ
JC
Thermal Impedance 44°C/W
Lead Soldering
Lead Temperature, Soldering
(10 sec)
300°C
IR Reflow, Peak Temperature 220°C
Pb-Free Soldering
Reflow, Peak Temperature 260(+0/−5)°C
Time at Peak Temperature 20 sec to 40 sec
1
Overvoltages at INx, S, or D must be clamped by internal diodes. Currents
should be limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those listed in the operational sections
of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating may be applied at any
one time.
Table 4. ADG621/ADG622 Truth Table
ADG621 INx ADG622 INx Switch Sx Condition
0 1 Off
1 0 On
Table 5. ADG623 Truth Table
IN1 IN2 Switch S1 Switch S2
0 0 Off On
0 1 Off Off
1 0 On On
1 1 On Off
ESD CAUTION