Datasheet

ADG824 Data Sheet
Rev. C | Page 6 of 16
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 4.
Parameter Rating
V
DD
to GND −0.3 V to +4.6 V
Analog Inputs
1
−0.3 V to V
DD
+ 0.3 V
Digital Inputs
1
−0.3 V to +4.6 V or 10 mA,
whichever occurs first
Peak Current, Sx or Dx Pins
Pulsed at 1 ms,
10% duty cycle max
3.3 V Operation
500 mA
2.5 V Operation 460 mA
1.8 V Operation 420 mA
Continuous Current, Sx or Dx Pins
3.3 V Operation 300 mA
2.5 V Operation 275 mA
1.8 V Operation
250 mA
Operating Temperature Range −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
Mini LFCSP Package
θ
JA
Thermal Impedance
(4-Layer Board)
131.6°C/W
Reflow Soldering (Pb-Free)
Peak Temperature 260°C
Time at Peak Temperature 10 sec to 40 sec
1
Overvoltages at the INx, Sx, or Dx pins are clamped by internal diodes.
Current should be limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating may be applied at any
one time.
ESD CAUTION