Datasheet

ADM1062
Rev. C | Page 10 of 36
Pin No.
LFCSP
1
TQFP
Mnemonic Description
39 46 VDDCAP
Device Supply Voltage. Linearly regulated from the highest of the VPx, VH pins to a typical of 4.75 V.
Note that the capacitor must be connected between this pin and GND. A 10 μF capacitor is
recommended for this purpose.
40 47 GND
2
Supply Ground.
1
Note that the LFCSP has an exposed pad on the bottom. This pad is a no connect (NC). If possible, this pad should be soldered to the board for improved mechanical stability.
2
In a typical application, all ground pins are connected together.