Datasheet

ADM811/ADM812 Data Sheet
Rev. G | Page 4 of 12
ABSOLUTE MAXIMUM RATINGS
Typical values are at T
A
= 25°C, unless otherwise noted.
Table 2.
Parameter Rating
Terminal Voltage (With Respect to Ground)
V
CC
−0.3 V to +6 V
All Other Inputs −0.3 V to V
CC
+ 0.3 V
Input Current
V
CC
20 mA
MR
20 mA
Output Current
RESET
20 mA
Power Dissipation (T
A
= 70°C)
RA-4 (SOT-143) 200 mW
Derate by 4 mW/°C Above 70°C
θ
JA
Thermal Impedance
330°C/W
Operating Temperature Range −40°C to +85°C
Storage Temperature Range −65°C to +160°C
Lead Temperature (Soldering, 10 sec) 300°C
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220°C
ESD Rating 3 kV
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION