Datasheet

ADN2873
Rev. 0 | Page 6 of 20
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter Rating
VCC to GND 4.2 V
IMODN, IMODP −0.3 V to +4.8 V
All Other Pins −0.3 to +3.9 V
Junction Temperature 150°C
Operating Temperature Range, Industrial −40°C to +85°C
Storage Temperature Range –65°C to +150°C
Junction Temperature (T
J
max) 125°C
Power Dissipation
1
(T
J
max − T
A
)/θ
JA
W
θ
JA
Thermal Impedance
2
30°C/W
θ
JC
Thermal Impedance 29.5°C/W
Lead Temperature (Soldering, 10 sec) 300°C
1
Power consumption equations are provided in the Power Consumption
section.
2
θ
JA
is defined when the part is soldered on a four-layer board.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION