Datasheet

ADP1048-600-EVALZ PRD 1363
Rev. 1.3 | Page 25 of 26
Reg(FE41 h) = 9h - VFB_ADC_gain_Trim
Reg(FE42 h) = 81h - CS_ADC_gain_Trim_500mV_range
Reg(FE43 h) = C0h - Ibal gain
Reg(FE44 h) = 1Ah - SMTVOUT_LOW_POWER_THRES
Reg(FE45 h) = C0h - SMTVOUT_HIGH_POWER_THRES
Reg(FE46 h) = 457h - SMTVOUT_LOW_LINE_VO1
Reg(FE47 h) = 4ACh - SMTVOUT_LOW_LINE_VO2
Reg(FE48 h) = 479h - SMTVOUT_High_LINE_VO1
Reg(FE49 h) = 4FEh - SMTVOUT_High_LINE_VO2
Reg(FE4A h) = 4FEh - SMTVOUT_UPLIMIT_VOH
Reg(FE4B h) = 66Ah - SMTVOUT_VAC_240V
Reg(FE4C h) = 0h - SYNC_DELAY
Reg(FE4D h) = 5Dh - SMTVOUT_VAC_240V_HYS
Reg(FE4E h) = 9h - Power_HYS
Reg(FE4F h) = 40h - ADVANCED_FEUTURE_ENABLE
Reg(FE50 h) = 0h - VOUT_OV_FAULT_HYS
Reg(FE51 h) = 3Ch - VIN_UV_FAULT_HYS
Reg(FE53 h) = 0h - VAC_ADC_offset_Trim
Reg(FE54 h) = 0h - CS_ADC_offset_Trim_500mV_range
Reg(FE7E h) = 3Ch - CS_ADC_GAIN_TRIM_750mV_range
Reg(FE7F h) = 0h - CS_ADC_OFFSET_TRIM_750mV_range
Reg(FE90 h) = 50h - Current loop filter gain for low line input
and light load
Reg(FE91 h) = B4h - Current loop filter zero for low line input
and light load
Reg(FE92 h) = 50h - Current loop filter gain for high line input
and light load
Reg(FE93 h) = B4h - Current loop filter zero for high line input
and light load
Reg(FE94 h) = 0h - Smart VOUT power reading
Reg(FE95 h) = 8h - IBAL configurationReg(FE94 h) = 0h -
SMTOUT_POWER_AVE