Datasheet

EVAL-ADP1655

Rev. 0 | Page 5 of 20

USING THE SOFTWARE GUI

VIC AND VDDIO VOLTAGE SETTINGS.

VOLTAGE, CURRENT, AND EFFICIENCY MONITORS.

DIGITAL INPUT CONTROLS.

MOTHERBOARD HARDWARE ENABLE BUTTONS.

08032-010

Figure 10. ADP1655 Graphical User Interface (GUI), Hardware Configuration and Monitors Window

HARDWARE CONFIGURATION AND MONITORS

Follow these three steps to load the ADP165 evaluation

software:

1. Before running the software, ensure that the board is

plugged into the computer USB port (USB5V LED, D13,

on the motherboard should light up).

2. Click the Start button, located at the bottom left-hand

corner of your desktop.

3. Select All Programs, then the Analog Devices folder, and

then ADP1655 Evaluation Software 0v3 to load the

software (see Figure 10).

If you are powering the ADP1655 daughterboard from the

motherboard (see Figure 16) you can change the VIC voltage by

moving the VIC voltage slider and clicking Update VIC. The

VDDIO voltage can be changed by moving the Vddio voltage

slider and clicking Update Vddio.

Voltages and currents on the daughterboard can be monitored

by clicking the Monitor Voltages and Currents button.