Datasheet

EVAL-ADP2114

Rev. 0 | Page 16 of 20

ORDERING INFORMATION

BILL OF MATERIALS

Table 4. ADP2114-EVALZ Bill of Materials

Qty Reference Designator Description Manufacturer Part Number

4 CB1, CB2, CB4, CB5 Circuit breaker, 0603, open

1 CB3 Circuit breaker, open

1 C1 Capacitor, MLCC, 100 µF, 6.3 V, X5R, 1210 Murata GRM32ER60J107ME20L

2 C2, C4 Capacitor, MLCC, 1200 pF, 50 V, C0G, 0603 TDK C1608C0G1H122J

3 C3, C5, C17 Not populated

1 C6 Capacitor, MLCC, 1.0 µF, 10 V, X7R, 0603 TDK C1608X7R1C105K

2 C7, C9 Capacitor, MLCC, 10000 pF, 50 V, X7R, 0603 Panasonic ECJ-1VB1H103K

2 C8, C10 Capacitor, MLCC, 100 pF, 50 V, C0G, 0603 TDK C1608C0G1H101J

3 C11, C12, C15 Capacitor, MLCC, 22 µF, 6.3 V, X5R, 0805 TDK C2012X5R0J226M

1 C13 Not populated

2 C14, C16 Capacitor, MLCC, 47 µF, 6.3 V, X5R, 1210 Panasonic ECJ-4YB0J476M

3 EN1, EN2, SCFG HEADER3 0.100 inch Sullins PBC03SAAN

5 TP1, PGOOD1, PGOOD2, GND., GND Test point Sullins PBC01SAAN

6 J1, J2, J3, J4, J5, J6 Jack, noninsulated, staking 0.218 inch Keystone Electronics 575-4

1 L1 Inductor, fixed, 4.7 µH, SMD TOKO FDV0630-4R7M

1 L2 Inductor, fixed, 2.2 µH, SMD TOKO FDV0620-2R2M

1 R1 Resistor, 10 Ω, 1/10 W, 5%, SMD, 0603

2 R2, R4 Resistor, 22 kΩ, 1/10W, 5%, SMD, 0603

4 R3, R5, R11,R 14 Resistor, 0 Ω, 1/10 W, 5%, SMD, 0603

5 R6, R12, R13, R15, R17 Not populated

2 R7, R9 Resistor, 100 kΩ, 1/10 W, 5%, SMD, 0603

2 R8, R10 Resistor, 1 kΩ, 1/10 W, 5%, SMD, 0603

1 R16 Resistor, 47 kΩ, 1/10 W, 5%, SMD, 0603

1 R18 Resistor, 15 kΩ, 1/10 W, 5%, SMD, 0603

1 R19 Resistor, 8.2 kΩ, 1/10 W, 5%, SMD, 0603

7 T1, T2, T3, T4, T5, T6, T7 Terminal, double turret, brass, 0.078” Keystone Electronics 1502-1

1 U1 Configurable, dual 2 A/single 4 A,

synchronous step-down, dc-to-dc regulator

Analog Devices ADP2114ACPZ-R7

3 Connector, shunt dual beam 30AU PCB Tyco Electronics

390088-1

Standoff, 0.500 inch, #4-40, nylon 6/6, hex

Keystone Electronics 1902C

4 Screw, nylon, slot pan head, 4-40 thread, ¼

inch length

Richco Plastic Co. NSS-4-4-01