Datasheet

RedyKit User Guide
UG-038
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Te l: 781.329.4700 • Fax: [phone] • www.analog.com
RedyKit™ for the ADP2504 Buck-Boost Converter
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. B | Page 1 of 4
FEATURES
All-voltage option for evaluation
Surface-mount ADP2504 parts that can be easily soldered
Additional parts for prototyping
ADP2504CPZ-REDYKIT CONTENTS
1 each ADP2504-2.8-EVALZ evaluation board V
OUT
2.8 V
1 each ADP2504-5.0-EVALZ evaluation board V
OUT
5.0 V
3 each ADP2504 voltage options in a labeled bag
08404-001
Figure 1. ADP2504CPZ-REDYKIT
TYPICAL APPLICATION CIRCUIT
SW1
1.0µH
PVIN
V
IN
2.3V TO 5.5V
V
OUT
2.8V TO 5V
22µF10µF
ADP2504
VIN
VOUT
SW2
FB
SYNC
EN
OFF
ON
PGND
AGND
08404-002
Figure 2.
GENERAL DESCRIPTION
The ADP2504CPZ-REDYKIT allows simplified prototyping
and evaluation and is available for every standard fixed output
voltage option in the ADP2504 product family. The kit allows the
user to evaluate the voltage options with one easy to order kit.
All surface-mount ADP2504 parts come sorted and stored in
the kit with the Analog Devices, Inc., part number and fixed
output voltage clearly printed on each zip-top bag (see Figure 5).
The kit can be used in the engineering lab to evaluate required
voltage options. If other voltage options must be evaluated, a
different part from the kit can be easily soldered onto one of the
evaluation boards supplied with the kit.
The ADP2504CPZ-REDYKIT is available with fixed 2.8 V and
5.0 V evaluation boards. The kit also contains additional parts for
prototyping. The kit enclosure, which contains individually
packaged parts and the two evaluation boards, is packaged in
an ESD foam pad inside a treated cardboard box that measures
8.7" (L) × 7.9" (W) × 1.75"(H), that is, 22 cm (L) × 20 cm (W) ×
4.5 cm (H).
The ADP2504 evaluation board data sheet, EVAL-ADP2503/
ADP2504, can be found at www.analog.com.
RedyKit is a trademark of Analog Devices, Inc.