Datasheet
ADV212
Rev. B | Page 23 of 44
121-Ball Package 144-Ball Package
Pin No. Location Pin No. Location Mnemonic
Pins
Used Type Description
101 K2 122 L2 SCOMM3 I
Serial Communication. For internal use only.
This pin should be tied low via a 10 kΩ
resistor.
115 L5 123 L3 SCOMM2 O
Serial Communication. For internal use only.
This pin should be tied low via a 10 kΩ
resistor.
103 K4 109 K1 SCOMM1 I
Serial Communication. For internal use only.
This pin should be tied low via a 10 kΩ
resistor.
102 K3 110 K2 SCOMM0 O
Serial Communication. This pin should be tied
low via a10 kΩ resistor.
53 E9 60 E12 VCLK 1 I
Video Data Clock. This pin must be supplied if
video data is input/output on the VDATA bus.
44, 43, 29,
31, 32, 18
to 20, 22,
21, 7, 10
D11, D10,
C7, C9, C10,
B7, B8, B9,
B11, B10,
A7, A10
46 to 48,
34 to 36,
22 to 24,
9 to 11
D10 to D12,
C10 to C12,
B10 to B12,
A9 to A11
VDATA[11:0] 12 I/O
Video Data. Unused pins should be pulled
down via a 10 kΩ resistor.
41 D8 58 E10 VSYNC 1 I/O Vertical Sync for Video Mode.
VFRM
Raw Pixel Mode Framing Signal. When this pin
is asserted high, it indicates the first sample of
a tile.
42 D9 59 E11 HSYNC 1 I/O Horizontal Sync for Video Mode.
VRDY O Raw Pixel Mode Ready Signal.
54 E10 57 E9 FIELD 1 I/O Field Sync for Video Mode.
VSTRB I Raw Pixel Mode Transfer Strobe.
94 J6 120 K12 TCK 1 I
JTAG Clock. If not used, this pin should be
connected to ground via a pull-down resistor.
108 K9 119 K11 TRS 1 I
JTAG Reset. If the JTAG is used, this pin must
be toggled low to high. If JTAG is not used,
this pin must be held low.
98 J10 118 K10 TMS 1 I
JTAG Mode Select. If JTAG is used, connect a
10 kΩ pull-up resistor to this pin. If not used,
this pin should be connected to ground via
a pull-down resistor.
116 L6 141 M9 TDI 1 I
JTAG Serial Data Input. If JTAG is used, connect
a 10 kΩ pull-up resistor to this pin. If JTAG is
not used, this pin should be connected to
ground via a pull-down resistor.
109 K10 130 L10 TDO 1 O
JTAG Serial Data Output. If this pin is not used,
do not connect it.
3, 8, 40, 84,
120
A3, A8, D7,
H7, L10
18, 19, 30,
31, 42, 43,
102, 103,
114, 115,
126, 127,
142
B6, B7, C6,
C7, D6, D7,
J6, J7, K6,
K7, L6, L7,
M10
VDD 5/13 V Positive Supply for Core.