Datasheet

Data Sheet ADV7390/ADV7391/ADV7392/ADV7393
Rev. G | Page 103 of 108
Table 126. 8-Bit 720p YCrCb In (EAV/SAV), RGB Out
Subaddress Setting Description
0x17 0x02 Software reset.
0x00 0x1C All DACs enabled. PLL enabled (4×).
0x01 0x20 HD-DDR input mode. Luma data
clocked on falling edge of CLKIN.
0x02 0x10 RGB output enabled. RGB output sync
enabled.
0x30 0x2C 720p at 60 Hz/59.94 Hz. EAV/SAV syn-
chronization. EIA-770.3 output levels.
0x31 0x01 Pixel data valid. 4× oversampling.
Table 127. 10-Bit 720p YCrCb In (EAV/SAV), RGB Out
Subaddress Setting Description
0x17 0x02 Software reset.
0x00 0x1C All DACs enabled. PLL enabled (4×).
0x01 0x20 HD-DDR input mode. Luma data
clocked on falling edge of CLKIN.
0x02 0x10 RGB output enabled. RGB output sync
enabled.
0x30 0x2C 720p at 60 Hz/59.94 Hz. EAV/SAV syn-
chronization. EIA-770.3 output levels.
0x31 0x01 Pixel data valid. 4× oversampling.
0x33 0x6C 10-bit input enabled.
Table 128. 8-Bit 1080i YCrCb In (EAV/SAV), YPrPb Out
Subaddress Setting Description
0x17 0x02 Software reset.
0x00 0x1C All DACs enabled. PLL enabled (4×).
0x01 0x20 HD-DDR input mode. Luma data
clocked on falling edge of CLKIN.
0x30 0x6C 1080i at 30 Hz/29.97 Hz. EAV/SAV syn-
chronization. EIA-770.3 output levels.
0x31 0x01 Pixel data valid. 4× oversampling.
Table 129. 10-Bit 1080i YCrCb In (EAV/SAV), YPrPb Out
Subaddress Setting Description
0x17 0x02 Software reset.
0x00 0x1C All DACs enabled. PLL enabled (4×).
0x01 0x20 HD-DDR input mode. Luma data
clocked on falling edge of CLKIN.
0x30 0x6C 1080i at 30 Hz/29.97 Hz. EAV/SAV syn-
chronization. EIA-770.3 output levels.
0x31 0x01 Pixel data valid. 4× oversampling.
0x33 0x6C 10-bit input enabled.
Table 130. 8-Bit 1080i YCrCb In (EAV/SAV), RGB Out
Subaddress Setting Description
0x17 0x02 Software reset.
0x00 0x1C All DACs enabled. PLL enabled (4×).
0x01 0x20 HD-DDR input mode. Luma data
clocked on falling edge of CLKIN.
0x02 0x10 RGB output enabled. RGB output sync
enabled.
0x30 0x6C 1080i at 30 Hz/29.97 Hz. EAV/SAV syn-
chronization. EIA-770.3 output levels.
0x31 0x01 Pixel data valid. 4× oversampling.
Table 131. 10-Bit 1080i YCrCb In (EAV/SAV), RGB Out
Subaddress Setting Description
0x17 0x02 Software reset.
0x00 0x1C All DACs enabled. PLL enabled (4×).
0x01 0x20 HD-DDR input mode. Luma data
clocked on falling edge of CLKIN.
0x02 0x10 RGB output enabled. RGB output sync
enabled.
0x30 0x6C 1080i @ 30 Hz/29.97 Hz. EAV/SAV syn-
chronization. EIA-770.3 output levels.
0x31 0x01 Pixel data valid. 4× oversampling.
0x33 0x6C 10-bit input enabled.