Datasheet
ADSP-21364 EZ-KIT Lite Evaluation Kit for
the ADSP-2136X SHARC Processor Family
www.analog.com/processors/tools
Overview
The ADSP-21364 EZ-KIT Lite™ provides developers with a cost-effective method for initial
evaluation of the ADSP-21364 SHARC
®
Processor architecture via a USB-based,
PC-hosted tool set.With this EZ-KIT Lite, users can learn more about Analog Devices’ (ADI’s)
ADSP-21364 hardware and software development and quickly prototype a wide range
of applications.
The EZ-KIT Lite includes an ADSP-21364 SHARC Processor desktop evaluation board along
with an evaluation suite of the VisualDSP++
®
development and debugging environment
including the C/C++ compiler, assembler, and linker.The evaluation suite of VisualDSP++
is designed to be used with the EZ-KIT Lite only.
An Analog Devices SHARC EZ-Extender™ daughter board (sold separately) can attach to the
ADSP-21364 EZ-KIT Lite using the three expansion connectors, allowing a number of Analog
Devices High Speed Converter (HSC) evaluation boards to interface with the EZ-KIT Lite.
Key Features
• ADSP-21364 SHARC Processor
• 1 M x 8-bit FLASH memory
• 512 K x 8-bit SRAM
• 512 Kbit SPI
®
FLASH memory
• AD1835 stereo, 96 kHz, 24-bit
∑
∆ codec
• 4 x 2 RCA jack for four channels
of stereo audio output
• 1 x 2 RCA jack for one channel of
stereo audio input
• Headphone jack (connected to one
of the stereo outputs)
• SPDIF In RCA jack
• SPDIF Out RCA jack
• USB-based debugger interface
• JTAG ICE 14-pin header
• Evaluation suite of VisualDSP++
development tools
• FLASH utility for downloading boot code
to on-board FLASH memory
• Type A expansion interface with three
connectors supporting parallel port,
FLAG, SPI, and DAI interfaces
• 8 general-purpose LED
• 4 push buttons: two general-purpose
input (connected to DAI), two IRQ
(connected to flag pins)
• USB cable
• CE certified
System Requirements
• Intel
®
Pentium
®
166 MHz, or higher
• 32 MB RAM, minimum
• Microsoft
®
Windows
®
98/2000/XP
• One available USB connector