Datasheet

ADSP-21479 EZ-Board Evaluation System Manual 2-1
2 ADSP-21479 EZ-BOARD
HARDWARE REFERENCE
This chapter describes the hardware design of the ADSP-21479
EZ-Board.
The following topics are covered.
• “System Architecture” on page 2-2
Describes the board’s configuration and explains how the board
components interface with the processor.
• “Flags and Memory Selects” on page 2-6
Shows the locations and describes the DAI pins, DPI pins, general
purpose flags, and asynchronous memory select lines.
• “Push Buttons and Switches” on page 2-7
Shows the locations and describes the push buttons and switches.
• “Jumpers” on page 2-19
Shows the locations and describes the configuration jumpers.
• “LEDs” on page 2-21
Shows the locations and describes the LEDs.
• “Connectors” on page 2-23
Shows the locations and provides part numbers for the on-board
connectors. In addition, the manufacturer and part number infor-
mation is provided for the mating parts.