Datasheet

Preliminary Technical Data EVAL-ADM106x
DM106X CONFIGURATION TOOL
TRODUCTION
ration Tool provided by Analog Devices
ng
Windows 2000
50 r
8
There are also minimum vie ents of 800 x 600 High
laid out with a tabbed format, each tab enabling the
DM106x SOFTWARE
re from the
www.analog.com/sequencers
A
IN
The ADM106x Configu
enables the user to program the many features of these Super
Sequencers through an intuitive, GUI based interface. The Eval
board then allows the user to verify their configuration before usi
the ADM106x in their own system application. All of the circuitry
provided on the board extra to the ADM106x can also be controlled
using the same software provided. The following minimum system
requirements apply:
0 MHz Processo
0 MB free disc space
256 RAM
wing requirem
colour (16 bit).
The software is
program of a key feature of the device. Each of these tabs will be
discussed in detail below.
INSTALLING THE A
The ADM106x software can be installed as follows:-
1. Download the .zip file containing the softwa
website:-
2. Once dow the .zip file.
l
nloaded, extract the files from
3. Double click on Setup.exe. The following window wil
appear:-
Figure 11. ADM106x Eval SW Installation Wizard
4. Clic r:- k on Next>. The following window will appea
Figure 12. ADM106x Eval SW- Choosing a folder
5. Click on Next> unless you wish to change the default
destination folder. If you wish to change the default
folder, click on Browse and navigate to create the
required destination folder. Once you click on Next>,
the following window will appear:-
Figure13. ADM106x Eval SW- Ready to Install
6. Click on Next>. The following window will appear:-
Rev. PrB | Page 15 of 38