Datasheet

Preliminary Technical Data EVAL-ADM106x
Figure18. Automatically installing drivers for Eval Board
In Windows XP a warning will be encountered indicating that the
hardware has not passed Windows Logo testing to verify
compatibility with Windows XP. The evaluation board has been
tested and is compatible with Windows XP and to install the
necessary drivers simply left click <continue Anyway> as shown in
figure 19.
Figure 19. Windows XP compatible
Figure20. ADM106x Evaluation Board drivers installed
Once this is completed the screen in figure 20 appears and to
close the instillation wizard left click finish. The software can
now be opened again and run as normal.
LAUNCHING THE SOFTWARE
Click on:-
Start> All Programs> ADM106x Configuration Software>
ADM106x Configuration Software>
Once launched, one of two windows appear. The first, if the
Eval board is powered up and an ADM106x is in the socket, is
shown below. The highlighted address with the tick in the box,
indicates that an ADM1066 has responded on the SMBus at
address 01101110 (6Eh)
Click Continue
Anyway
Figure21. ADM106x s/w launch- ADM1062 online
If no ADM106x devices are found the dialog box shown in
Figure22 appears asking if the user wishes to work offline.
Rev. PrB | Page 17 of 38