Datasheet

EVAL-ADM106x Preliminary Technical Data
2. RECALL SETTINGS FROM FILE
This option launches a window , shown in figure 82, that allows the
user to recall a saved configuration from file. There are three
buttons that may be selected in this window .
Figure 83. Recall settings from file window
1. Recall eval board settings:- This option will recall
the evaluation board configuration from file for the
inputs to the device only.
2. Recall controlling registers:- This option will
recall all the configuration register data from file. This
data may be different to that of the EEPROM.
3. Recall all EEPROM settings:- This option will
recall the EEPROM data from file.
COMPARING CHECKSUM TO A FILE
A user may wish to verify that the contents of the EEPROM are
exactly the same as those of a file saved from a different device.
This is easily done using the <Compare Device contents to Text
file> option under the <File> menu. When used, the software issues
the following report. This report can be saved in a text file for
detailed examination.:-
Figure 84. compare checksum to a file
SHORTCUT KEYS
To speed up using the program the menu functions also have
shortcut keys which can be availed of by holding down the Ctrl
key and hitting the relevant letter. Table 4 below shows the
menu functions and the relevant shortcut keys.
Menu Function Shortcut
Key
Save settings to File * Ctrl + S
Recall settings from File*
Ctrl + R
Save Offline settings to File* Ctrl + S
Recall Offline settings from File* Ctrl + R
Compare EEPROM contents of device to text file Ctrl + X
Copy entire configuration to EEPROM Ctrl + C
Upload device EEPROM contents to PC Ctrl + U
Enable/Disable save configuration version to
EEPROM
Ctrl + D
Change device/ cycle power * Ctrl + Z
Erase Device Ctrl + V
Device Search * Ctrl + Z
Show Help Ctrl + H
About Ctrl + A
IBM ThinkPad Communications setup ** Ctrl + I
Launch Sequencers Home page Ctrl + L
Exit Ctrl + E
TABLE 8. Shortcut Keys
*Note: Options with the same shortcut key will not be enabled
together, only one will be enabled dependant on whether one is
working with an evaluation board or offline.
** IBM ThinkPad Communications setup is a user guide to
setting up the communications between the board and software
in the event of the software unable to see a connected board.
Rev. PrB | Page 38 of 38
PR04888-0-7/05(PrB)