Datasheet

EVAL-ADM106x Preliminary Technical Data
Rev. PrB | Page 4 of 38
MICRO EVALAUTION KITS
Micro-Evaluation boards are also available. Two versions of
these micro-boards exist. The EVAL-ADM106xMEB is for use
with devices ranging from the ADM1062 to the ADM1067 and
the EVAL-ADM1068-9MEB for use with ADM1068 and
ADM1069 devices.
These basic boards have the following features:
• They function like the standard evaluation board but
are much simpler.
• They allow in-system evaluation of the ADM1062-9
devices. The devices are accessible as there are few
external components on the board. The board also has
a low profile design to allow evaluation in a rack.
• Evaluation with user power supplies and other
circuitry is possible on the breadboard area.
• This board also provides a simple preprogramming
module for ADM1062-69 devices. The board accepts
the daughter-card socket modules from table 2 (the
appropriate socket should be ordered separately as
this is not included)
Part Order Code
Micro-board for ADM1062-7 EVAL-ADM1062-7MEB
Micro-board for ADM1068-9 EVAL-ADM1068-9MEB
Table 4: Socket and Cable Order Codes
Note that an SMBus cable is included in each kit. These boards
do not have a USB interface and therefore need external power
applied to them.
ORDERING AND SUPPORT
The order codes for any of these main kits, micro boards
boards, adapter boards or SMBus cables etc can be found on
page 1. Many of these items can be ordered online on the
relevant product pages.
For help with ordering or for any other assistance please
contact:
[e-mail]
CONFIGURATION TOOL
The latest version of the Configuration Tool software can be
found on our website at:
www.analog.com/sequencers
The configuration tool zip file can be downloaded from this
webpage. The contents of this file should be extracted once
downloaded. The setup.exe can then be run. Please follow this
on-screen instructions to install the tool.
Note that this tool is required to program and evaluate the
ADM1062-69 devices.