user manual

DSP programmers who are unfamiliar with Analog Devices Blackfin DSPs can
use this manual in conjunction with the ADSP-21535 DSP Hardware Reference
and the ADSP-21535 DSP Instruction Set, which describe the DSP architecture
and instruction set. DSP programmers who are unfamiliar with VisualDSP++
should refer to the VisualDSP++ Help menu and the VisualDSP++ User’s Guide.
For the locations of these documents, refer to section 1.6.
1.5 Manual Contents
This manual contains the following information:
• Chapter 1 — Introduction
Provides manual information and Analog Devices contact
information.
• Chapter 2 — Getting Started
Provides software and hardware installation procedures, PC system
requirements, and basic board information.
• Chapter 3 — Using the EZ-KIT Lite
Provides information on the EZ-KIT Lite from a programmers
perspective, and provides an easy-to-access memory map.
• Chapter 4 — EZ-KIT Lite Hardware Reference
Provides information on the hardware aspects of the evaluation
system.
• Appendix A — Bill of Materials
Provides a list of components used to manufacture the EZ-KIT Lite
board.
• Appendix B — Schematics
Provides the resources to allow EZ-KIT Lite board-level
debugging or to use as a reference design.
1.6 Online Help
Your software installation kit includes online Help as part of the Windows

interface. These help files provide information about VisualDSP++ and the
ADSP-21535 EZ-KIT Lite evaluation system.
To view VisualDSP++ Help, click on the Help menu item or go to the Windows
task bar and select Start\Programs\VisualDSP\VisualDSP++ Help.
ADSP-21535 EZ-KIT Lite Evaluation System Manual
1-4