user manual

The EZ-KIT Lite evaluation system contains ESD (electrostatic
discharge) sensitive devices. Electrostatic charges readily
accumulate on the human body and equipment and can
discharge without detection. Permanent damage may occur on
devices subjected to high-energy discharges. Proper ESD
precautions are recommended to avoid performance degradation
or loss of functionality. Store unused EZ-KIT Lite boards in the
protective shipping package.
2.3 PC Configuration
For correct operation of the VisualDSP++ software and the EZ-KIT Lite, your
computer must have the minimum configuration shown in Table 2-1.
Table 2-1: Minimum PC Configuration
Windows 98, Windows 2000
Intel (or comparable) 166MHz processor
VGA Monitor and color video card
2-button mouse
50 MB free on hard drive
32 MB RAM
Full-speed USB port
CD-ROM Drive
! NOTE: This EZ-KIT Lite does not run under Windows 95 or Windows
NT.
2.4 Installation Tasks
The following tasks are provided for the safe and effective use of the ADSP-
21535 EZ-KIT Lite. Follow these instructions in the order presented to ensure
correct operation of your software and hardware.
1. VisualDSP++ software installation
2. VisualDSP++ license installation
3. EZ-KIT Lite debug software installation
4. EZ-KIT Lite hardware setup
5. EZ-KIT Lite USB driver installation
6. USB driver installation verification
7. VisualDSP++ startup
ADSP-21535 EZ-KIT Lite Evaluation System Manual
2-2