Datasheet

ManualsBrandsANALOG DEVICES ManualsPMICsPMIC - voltage reference Series Adjustable PDIP 8

REV. C

Information furnished by Analog Devices is believed to be accurate and

reliable. However, no responsibility is assumed by Analog Devices for its

use, nor for any infringements of patents or other rights of third parties that

may result from its use. No license is granted by implication or otherwise

under any patent or patent rights of Analog Devices.

REF01

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781/329-4700 www.analog.com

Fax: 781/326-8703 © Analog Devices, Inc., 2002

10 V Precision

Voltage Reference

SIMPLIFIED SCHEMATIC

R10

OUTPUT

GROUND

R12 16.7k

TRIM

Q19

R15

INPUT

Q15

Q18

Q16

Q13

Q21

Q17

R13

Q20

Q14

Q12

Q11

R14

Q10

R11 2k

R9 50k

1.23V

FEATURES

10 V Output, 0.3% Max

Adjustment Range, 3% Min

Excellent Temperature Stability, 8.5 ppm/C Max

Low Noise, 30 V p-p Max

Low Supply Current, 1.4 mA Max

Wide Input Voltage Range, 12 V to 40 V

High Load Driving Capability, 20 mA

No External Components

Short Circuit Proof

GENERAL DESCRIPTION

The REF01 precision voltage reference provides a stable 10 V

output that can be adjusted over a 3% range with minimal effect

on temperature stability. Single-supply operation over an input

voltage range of 12 V to 40 V, a low current drain of 1 mA,

and

excellent temperature stability are achieved with an improved

band gap design. Low cost, low noise, and low power make the

REF01 an excellent choice whenever a stable voltage reference

is required. Applications include D/A and A/D converters,

portable instrumentation, and digital voltmeters. Full military

temperature range devices with screening to MIL-STD-883

are available. For new designs, please refer to ADR01.

Epoxy MINI-DIP (P-Suffix)

8-Lead Hermetic DIP (Z-Suffix)

8-Lead SO (S-Suffix)

NC = NO CONNECT*

OUT

TRIMGND

TOP VIEW

(Not to Scale)

REF01

TO-99 (J-Suffix)

OUT

TRIM

GROUND

(CASE)

NC = NO CONNECT*

PIN CONFIGURATION

*NC = No Connect. Do not connect anything on these pins as some

of them are reserved for factory testing purposes.

Summary of content (12 pages)

PAGE 1
a 10 V Precision Voltage Reference REF01 FEATURES 10 V Output, 0.3% Max Adjustment Range, 3% Min Excellent Temperature Stability, 8.5 ppm/ C Max Low Noise, 30 V p-p Max Low Supply Current, 1.
PAGE 2
REF01–SPECIFICATIONS ELECTRICAL SPECIFICATIONS (@ V IN = 15 V, TA = 25 C, unless otherwise noted.) Parameter Symbol Conditions Output Voltage Output Adjustment Range Output Voltage Noise1 Line Regulation2 Load Regulation2 Turn-On Settling Time3 Quiescent Supply Current Load Current Sink Current4 Short Circuit Current VO VTRIM en p-p IL = 0 mA 9.97 RP = 10 kΩ ± 3.0 0.1 Hz to 10 Hz VIN = 13 V to 33 V IL = 0 mA to 10 mA To ± 0.1% of Final Value No Load 10 –0.
PAGE 3
REF01 ELECTRICAL SPECIFICATIONS Parameter Symbol (@ VIN = 15 V, 0ⴗC ⱕ TA ⱕ 70ⴗC for REF01CJ, REF01CZ, and –40ⴗC ⱕ TA ⱕ +85ⴗC for REF01CP and REF01CS, unless otherwise noted.) Conditions Output Voltage Change ⌬VOT with Temperature5, 6 Output Voltage TCVO Temperature Coefficient7 Change in VO Temperature Coefficient with Output Adjustment Line Regulation2 Load Regulation2 REF01C Typ Max Min RP = 10 kΩ VIN = 13 V to 30 V IL = 0 to 5 mA Unit 0.14 0.45 % 20 65 ppm/°C 0.7 0.011 0.008 0.018 0.
PAGE 4
REF01 (@ VIN = 15 V, TA = 25 C for REF01N and REF01G devices, TA = 125 C for REF01NT and REF01GT devices, WAFER TEST LIMITS unless otherwise noted.)* Parameter Symbol Conditions Output Voltage VO IL = 0 Output Adjustment Range Line Regulation V TRIM RP = 10 kΩ VIN = 13 V to 33 V REF01NT Limit REF01N Limit REF01GT Limit REF01G Limit Unit 10.05 9.95 10.03 9.97 10.10 9.90 10.05 9.95 V max V min 0.015 ± 3.0 0.01 0.015 ± 3.0 0.
PAGE 5
REF01 ABSOLUTE MAXIMUM RATINGS* Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V Output Short Circuit Duration (to Ground or VIN) . . . . . . . . . . . . . . . . . . . . . . . . Indefinite Storage Temperature Range J, RC, and Z Packages . . . . . . . . . . . . . . . –65°C to +150°C P Package . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to +125°C Operating Temperature Range REF01A . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to +125°C REF01CJ . .
PAGE 6
0.0031 0.0100 56 0.0310 46 0.1000 36 0.3100 1.0000 26 0 10 VIN = 15V TA = 25 C 100 1,000 100 3.1000 1k 10k 100k FREQUENCY – Hz 10 10 10.000 1M TPC 1. Line Regulation vs. Frequency 1k 10k 100k FREQUENCY – Hz 0.020 0.015 0.010 0.005 0 –10 LOAD REG – T/LOAD REG – 25 C 30 25 500mW MAXIMUM DISSIPATION 20 15 10 5 15 20 25 INPUT VOLTAGE – V 30 TPC 4. Maximum Load Current vs. Input Voltage 0 10 20 30 TIME – s 40 50 60 TPC 3. Output Change Due to Thermal Shock 1.4 1.3 1.2 1.1 1.
PAGE 7
REF01 +15V ANALOG INPUT 0 TO +10V –15V +15V 2 VIN 10k +15V LSB MSB 0.1 F 5.0k VIN 0.1 F 6 VO 4 lO 2 DAC08 REF01 3 13 14 –15V lO 1 SERIAL OUTPUT E POS. FULL SCALE –1LSB 1 1 1 1 1 1 1 1 +4.960 ZERO SCALE 1 0 0 0 0 0 0 0 0.000 NEG. FULL SCALE +1LSB 0 0 0 0 0 0 0 1 –4.960 NEG. FULL SCALE 0 0 0 0 0 0 0 0 –5.
PAGE 8
REF01 REFERENCE STACK WITH EXCELLENT LINE REGULATION PRECISION CURRENT SOURCE A current source with 25 V output compliance and excellent output impedance can be obtained using this circuit. REF01 keeps the line voltage and power dissipation constant in the device; the only important error consideration at room temperature is the negative supply rejection of the op amp. The typical 3 µV/ V PSRR of the OP02E will create an 8 ppm change (3 V/V 25 V/10 V) in output current over a 25 V range.
PAGE 9
REF01 OUTLINE DIMENSIONS 8-Lead Ceramic Dip-Glass Hermetic Seal [CERDIP] (Q-8) 8-Lead Metal Can [TO-99] (H-08B) Dimensions shown in inches and (millimeters) Dimensions shown in inches and (millimeters) 0.055 (1.40) MAX 0.005 (0.13) MIN 8 REFERENCE PLANE 0.1850 (4.70) 0.1650 (4.19) 5 0.310 (7.87) 0.220 (5.59) PIN 1 1 0.2500 (6.35) MIN 0.1000 (2.54) BSC 4 0.320 (8.13) 0.290 (7.37) 0.060 (1.52) 0.015 (0.38) 0.3700 (9.40) 0.3350 (8.51) 0.3350 (8.51) 0.3050 (7.75) 5 0.405 (10.29) MAX 0.200 (5.
PAGE 10
REF01 Revision History Location Page 10/02—Data Sheet changed from REV. B to REV. C. Edits to FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Delete RC-SUFFIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Edits to ABSOLUTE MAXIMUM RATINGS . . . . . .
PAGE 11
–11–
PAGE 12
–12– PRINTED IN U.S.A.