Datasheet

Data Sheet REF01/REF02/REF03
Rev. M | Page 3 of 20
SPECIFICATIONS
REF01 SPECIFICATIONS
V
IN
= 15 V, T
A
= 25°C, I
LOAD
= 0 mA, all grades, unless otherwise noted.
Parameter Symbol Conditions Min Typ Max Unit
OUTPUT VOLTAGE V
O
A and E grades 9.97 10.00 10.03 V
H grade 9.95 10.00 10.05 V
C grade 9.90 10.00 10.10 V
OUTPUT ADJUSTMENT RANGE
1
ΔV
TRIM
A, E and H grades, POT = 10 kΩ ±3.0 ±3.3 %
C grade, POT = 10 kΩ ±2.7 ±3.0 %
INITIAL ACCURACY V
OERR
A and E grades ±30 mV
±0.3 %
H grade ±50 mV
±0.5 %
C grade ±100 mV
±1.0 %
TEMPERATURE COEFFICIENT
TCV
O
A and E grades, −55°C ≤ T
A
≤ +125°C
3.0
8.5
ppm/°C
H grade, 0°C ≤ T
A
≤ +70°C 10 25 ppm/°C
C grade, 0°C ≤ T
A
≤ +70°C (-J and -Z packages) 20 65 ppm/°C
C grade, −40 ≤ T
A
≤ +85°C (-P and -S packages) 20 65 ppm/°C
LINE REGULATION
2
∆V
O
/∆V
IN
A, E and H grades, V
IN
= 13 V to 33 V
60
100
ppm/V
A, E and H grades, V
IN
= 13 V to 33 V, 0°C ≤ T
A
≤ +70°C 70 120 ppm/V
A, E and H grades, V
IN
= 13 V to 33 V, −55°C ≤ T
A
≤ +125°C 90 150 ppm/V
C grade, V
IN
= 13 V to 33 V 90 150 ppm/V
C grade, V
IN
= 13 V to 30 V, 0°C ≤ T
A
≤ +70°C (-J and -Z packages)
110 180 ppm/V
C grade, V
IN
= 13 V to 30 V, −40°C ≤ T
A
≤ +85°C (-P and -S packages) 110 180 ppm/V
LOAD REGULATION
2
∆V
O
/∆I
LOAD
A and E grades, I
LOAD
= 0 mA to 10 mA 50 80 ppm/mA
A and E grades, I
LOAD
= 0 mA to 8 mA, 0°C ≤ T
A
≤ +70°C 60 100 ppm/mA
A and E grades, I
LOAD
= 0 mA to 8 mA, −55°C ≤ T
A
≤ +125°C 90 150 ppm/mA
H grade, I
LOAD
= 0 mA to 10 mA 60 100 ppm/mA
H grade, I
LOAD
= 0 mA to 8 mA, 0°C ≤ T
A
≤ +70°C 70 120 ppm/mA
H grade, I
LOAD
= 0 mA to 8 mA, −50°C ≤ T
A
≤ +125°C 90 150 ppm/mA
C grade, I
LOAD
= 0 mA to 8 mA
60
150
ppm/mA
C grade, I
LOAD
= 0 mA to 5 mA, 0°C ≤ T
A
≤ +70°C (-J and -Z packages) 80 180 ppm/mA
C grade, I
LOAD
= 0 mA to 5 mA, −40°C ≤ T
A
≤ +85°C (-P and -S packages) 80 180 ppm/mA
DROPOUT VOLTAGE V
DO
2 V
QUIESCENT CURRENT I
IN
A, E, and H grades 1.0 1.4 mA
C grade
1.0
1.6
mA
LOAD CURRENT I
LOAD
Sourcing A, E, and H grades 10 mA
C grade 8 mA
Sinking −0.3 mA
SHORT CIRCUIT TO GND
I
SC
V
O
= 0 V
30
mA
VOLTAGE NOISE e
N p-p
0.1 Hz to 10.0 Hz (-S, -Z and -P packages) 30 µV p-p
0.1 Hz to 10.0 Hz (-J package) 35 µV p-p
LONG-TERM STABILITY
3
∆V
O
After 1000 hours of operation 50 ppm
TURN-ON SETTLING TIME
t
R
Output settling to within ±0.1% of final value
5
µs
TEMPERATURE SENSOR
4
Voltage Output at TEMP Pin V
TEMP
580 mV
Temperature Sensitivity
TCV
TEMP
1.96
mV/°C
1
Refer to the Output Adjustment section.
2
Specification includes the effects of self-heating.
3
Long-term stability is noncumulative; the drift in subsequent 1000-hour periods is significantly lower than in the first 1000-hour periods. Refer to the Application Note AN-713.
4
Refer to the Temperature Monitoring section.