Instruction Manual

Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) BROAD SCAN (HD/SDI)
4-5. FUNCTIONS DESCRIPTION (continued)
[Gamma]
Select one of the 8 levels of the anti-flicker with  and validate with ENTER.
[Flicker filter]
Select one of the 8 levels of the anti-flicker with  and validate with ENTER.
[Sharpness]
Adjust the image sharpness with  and validate with ENTER.
[Preset]
This function allows to set all the image parameters (flicker filter, Black level, RGB level, under/overscan,
position & size) to the factory settings.
FUNCTION
POSITION
FUNCTION
POSITION
R, G, B levels
0
Flicker filter
4
Black level
0
Sharpness
0
Gamma
1
[AUDIO] Available on BHD930 & BSD830 models.
[Embed. ON/OFF]
Allows embedding analog audio stereo signal into the HD/SD-SDI signals.
[Mute ON/OFF]
Switch ON or OFF the audio output. Validate with ENTER.
[Level]
Adjust the audio level with  + ENTER.
[Balance]
Adjust the balanced level with  + ENTER.
[LUMAKEY OUT]
[Lumakey ON/OFF]
Allows activating Luma key outputs.
[Threshold]
[Offset up]
Offset up adjustment.
[Offset down]
Offset down adjustment.
[Gain]
Gain level adjustment.
PAGE 24