Instruction Manual

Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) BROAD SCAN (HD/SDI)
4-5. FUNCTIONS DESCRIPTION (continued)
[Edit EDID DVI]
Extended Display Identification Data (EDID) is a data structure provided by a computer display to describe its
capabilities to a graphics card. The Broad Scan allows to edit a format when none control monitor (computer
display) is connected to the broad scan or when you need to work in another format than the native control monitor
format. Select the resolution and rate, then activate the Broad Scan EDID (local) in following section
[EDID Selection] + ENTER.
Local: Activate the Broad Scan EDID
Loop: Activate the computer display EDID. The computer display should be connected to the DVI-D monitor
OUT.
[Erase memories] + ENTER.
This function allows erasing all the image settings memorized.
[Default value] + ENTER.
This function allows clearing the following adjustments and setting them to the factory value:
FUNCTION
POSITION
FUNCTION
POSITION
INPUTInput type
RGBHV/Cs
AUDIOAudio Embed.
OFF
INPUTH sync load
Hi-Z.
AUDIOMute
OFF
INPUTInput format
Auto select
AUDIOLevel
48
OUTPUTFormat
PAL 50Hz
AUDIOBalance
0
OUTPUTGenlockH phase
0
LUMA KEY
OFF
OUTPUTGenlockSC phase
0
LOGOS/FRAMEFrame
OFF
OUTPUTType
YUV
LOGOS/FRAMEFrame
OFF
OUTPUTTest pattern
OFF
CONTROLzoom type
direct
IMAGEAspect in
4/3
CONTROLauto frame
OFF
IMAGEAspect out
1:1
CONTROLEDID Selection
Loop
IMAGEUnder/over
underscan
Front PanelFRAME
OFF
IMAGER, G, B levels
0
Front PanelFREEZE
OFF
IMAGEBlack level
0
Front PanelPosition
0
IMAGEGamma
1
Front PanelSize
0
IMAGEFlicker filter
4
Front PanelZoom mode
OFF
IMAGESharpness
0
Front PanelZoom size
100%
PAGE 28