Instruction Manual

Chapter 7 : TECHNICAL SPECIFICATIONS (continued) BROAD SCAN (HD/SDI)
7-2. VIDEO OUTPUTS (continued)
• SDI LUMA KEY*
Connector: BNC female (x2).
Format: Same format as the output.
Impedance: 75 Ohm.
• HD-SDI LUMA KEY (available on BHD930 models only)
Connector: BNC female (x2).
Format: Same format as the output.
Impedance: 75 Ohm.
* Available on the BSD830 & BHD930 models only.
7-3. ANALOG GENLOCK (MODELS: BHD930-AG, BSD830-AG & BSC730)
Connectors: 2 BNC female.
Input signal type: Black Burst (PAL or NTSC) or 3-level HD black.
Impedance: 75 Ohm.
Output: Active loop-through.
7-4. DIGITAL GENLOCK (MODELS: BHD930-DG & BSD830-DG)
Connectors: 2 BNC female.
Input signal type: SD/HD-SDI Black.
Impedance: 75 Ohm.
Output: Active loop-through.
7-5. COMMUNICATION PORTS
• RS-232
Connector: DB9 female.
Data Rate: 9600 Bauds, 8 data bits, 1 stop bit, no parity bit, and no flow control.
Pin-out:
• LAN (Optional)
Connector: RJ-45 female.
Protocol: TCP (Transmission Control Protocol)
UDP (User Datagram Protocol).
Data Rate: 10 / 100 Mbps.
LED functions (on RJ45 connector):
Left LED
Right LED
Meaning
OFF
OFF
No link
OFF
ON
100 BASE-T link.
ON
OFF
10 BASE-T link.
PIN #
FUNCTIONS
2
Tx (transmit data to the control device)
3
Rx (receive data from the control device)
5
GROUND (Gnd)
8
Reserved for manufacturer.
DB9 connector
PAGE 36