User Manual
29
7.1 Operang mode
7. OPERATING THE EIKOS² FROM THE RCS²
7.1
Before you start seng up your Eikos² for the rst me, take some me to think about how you will be using
it. The Eikos² oers a choice of three operang modes, which results in a versale video producon tool for
live event staging and xed installaon applicaons.
NOTE: We recommend reseng the device to its default values every me you set up your shows or events.
This mode allows for a single Eikos² to seamlessly switch any of its 10 analog/digital inputs with any other of
the inputs, add PIP, tling or logo inseron to the live frame, while previewing your every move before going
live, to avoid embarrassing errors on your main screen. The Video output of the Eikos² allows to have a copy
of the full Main screen at a video resoluon for recording or broadcasng.
Frame
Layer A
Layer B
Layer C
Logo 1
Quick Frame
Logo 2
Background
Foreground
Go to the setup secon to start to set up
your unit. A Setup assistant is available
to help you to correctly adjust all basic
setups of your unit.
7.2 Setup
The device can work in 3 dierent modes, Mixer mode, Matrix mode or Quadravision mode.
7.2.1 Mode