User Manual
Contextual
buons
Menu scroll
knob
access Frame #1 to #4
or Logo #5 to #8
ll in a layer with a color
- 4 x HDMI
- 6 x DVI-I
(Dual link available on Inputs 2 and 6)
- 2 x DisplayPort
(Dual link available on Inputs 4 and 8)
- 8 x 3G/HD/SD-SDI
- 8 x Universal Analog
(4 x HD15 & 4 x DVI-A)
- 2 x Universal Analog (HD15 & DVI-A)
- 2 x DVI-I (DVI Dual-Link on output #1)
- 2 x Video Opcal SFP module cage
- 3G/HD/SD-SDI
not
scaled layer.
scaled layers
edit Program
edit Preview
Recall the last preset into
your Preview monitor
4.3’’ TFT color display
Hold for 3
seconds for stand-by
mode to force power o
USB Plug
Ethernet
Plug
Tally
Analog Frame
Lock plug and
specic loop
output
Home menu
or back one level
validate the menu
or command
100-240 VAC; 4.8A;
50/60Hz; 225W; internal,
autoswitchable
Reserved for
manufacturer
4 x USB Plugs
Used for eect sync in
mul-machine mode.
See User’s Manual for details
load a preset
save a preset
Transion the pre-
selected sources onto the
Program output with the
selected eects
- 1 x Universal Analog (HD15 & DVI-A)
- 1 x DVI-I
- 2 x SD/HD/3G SDI
- 1 x RGBs/RGsB/RGB/YPrBr/YC/comp
Analog output
clear a layer
adjust
Layer properes
press before selecng the
Logo/Frame number
freeze the input linked to the
current layer on the Program
select a screen
The user should avoid disconnecng the power source
(AC input) unl the unit is in stand-by mode. Failure to
do this could result in hard drive data corrupon.