Manual

Create the text to be displayed on the compu-
ter used as the reference input, using software
such as PowerPoint® : the text should be bright
(yellow, white...) on a black background.
a) Display the main background source on the
main output.
b) Pre-select the reference computer input
(input #1).
c) Select an EFFECT PRESET, then assign it
the TITLE effect.
d) Then, press TAKE. The text appears onto the
displayed image.
NOTE: To turn OFF the text, press TAKE again.
The PIP effect allows to insert a source onto the
reference computer input or onto a frame. This
effect is only possible between the reference
input/frame and the other inputs.
Display on the MAIN output the reference com-
puter input or a frame (input #1 in this example).
a) Pre-select the input used for the PIP effect
(input #3 in this example). The LED is blinking.
b) Select an EFFECT PRESET, then assign it
the PIP effect. You can then adjust position and
size of your PIP.
c) Press TAKE. The PIP appears onto the dis-
played image.
NOTE: To turn OFF the PIP, press TAKE again.
d) You can change the background image during
a PIP effect (between the reference input & the
frames store). Press the reference input selec-
tion button or Fn button plus the desired frame
selection button. The transition of the background
operates seamlessly.
e) You can change the PIP source (between the
other inputs except for the reference input). Press
the desired input selection button. The transition
of the PIP operates with a fade to black or a cus-
tomized color.
Operating mode
Going further with the Octo Value
Please check the User Manual and our website for further information: www.analogway.com
Version: 2.45 - 20/12/2011
Code: 140115
Background = reference input #1
PIP = Input #3
Background = frame #1
PIP = Input #3
Background = frame #1
PIP = Input #4
• The device allows 4 different switching effects: CUT*, FADE*, FADE CO-
LOR and CLEAN CUT. The CUT effect allows switching seamlessly between
2 sources. The FADE effect allows fading out the displayed source while another
source is fading in. The FADE COLOR effect allows switching between 2 sources
with a fading through the color of you choice. The CLEAN CUT allows a clean
switching thanks to a fast freeze of the displayed source.
• PIP* = Picture in Picture is also available effect.
• OXE831 also enables you to key text onto the displayed image (TITLE* effect).
SWITCHING OPERATIONS
*
The CUT, FADE,
PIP and TITLE ef-
fects are active in
SEAMLESS mode
and only between the
reference computer
input and the other
inputs.
• TITLE
• PIP
d)
e)
Frame #1 selection Input #4 selection
!
TITLE
TITLE
Main source (Input #3)
Title source (Input #1) Displayed image (MAIN)
a)
b)
c)
Reference input #1 (MAIN) Input #3 (PREVIEW)
Displayed image (MAIN)
TAKE
b)
c)
a)