User guide
The PLS300 allows the creation of user dened presets very easily.
Any setup you have congured on screen, can be stored into one of
the 4 available user presets.
1/ After having congured layers, PIP transitions, logos... on your
screen (see “Working With the RCS” chapter, p. 44), click on one
of the four available Preset buttons.
2/ In the dropdown menu, choose Save From Main or Save From
Preview to determine which screen you want to memorize the
preset from.
Working with presets
Working with audio
Creating presets
The four PLS300 user presets can be called back at any stage
during your show or event.
1/ Click one of the four available Preset buttons to choose which
memory you wish to use. Select Load to Preview from the
dropdown menu, your preset will appear on the Preview screen.
2/ Click the [TAKE] button to view your preset on the Main screen.
The PLS300 allows to work with up to 6 stereo inputs, 1 auxiliary input,
and 2 embedded SDI audio inputs (via the SDI BNC connectors), all
accessible via the Audio menu of the PLS300, and which can be
affected to the main symetrical/asymetrical output of the device.
48