User manual

49
8.1.1 Menu navigaon
8. OPERATING THROUGH THE FRONT PANEL
8.1 
To access the Pulse² menu, press the  buon in the control
secon. To highlight items in the menu which will appear on the VFD
screen, turn the scroll knob le or right to the desired menu item. When
you have reached the desired menu item, press the ENTER buon in
the control secon to access that menu funcon. Pressing the ENTER
buon when a selecon has been made sets the value to that selecon
in the Pulse² memory. When all sengs have been made, press the
 buon to exit sub-menus and return to the main menu.
Pressing the MENU buon in the menu secon of the Pulse², will display and give you access to the following
items on the menu VFD screen:
 select to choose which mode the Pulse² will work in (Mixer/Matrix mode),
 select to set the output types and resoluons of Output #1,
select to set the output types and resoluons of Output #2,

1
: select to congure Video output card sengs ,
 select to congure the 8 individual input types and resoluons,
 select to store and use presets,
 select to change source image sengs of an input,
 select to access keying and tling controls and parameters when video layer is selected,
 setup your background color and your Quick Frame,
 select to adjust layer size, posion, border, transparency or transions,
 select to store (record), use and manage logos and frames into the Pulse²,
 select to access all audio input and output parameters,
 select to access device soware informaon, LAN sengs, reset factory sengs, and other user
oriented funcons.
* These items are only displayed if a valid input is assigned to the current layer.
1. Pulse² - Ref. PLS350-3G only
The Pulse² oers 2 modes to work from: the Mixer mode and the Matrix mode which turns your Pulse² into
a true 8 x 2 scaled matrix with numerous eects and PIPs and logos.
To choose which mode the Pulse² will operate in, press the  buon and select mode in the menu
by rotang the scroll knob. Then press the ENTER buon to enter the MODE sub-menu. Select the desired
mode by rotang the scroll knob, and press the ENTER buon to conrm your choice. Press the 
buon to return to the main menu.



Simply selecng a menu item will not set it to that value. Be sure to press the ENTER buon when
parametering the menu items or to push the scroll knob.