Owner's manual
  5-3-5  [Luma key level] + ENTER.
 Thisfunctionallows“erasing”thedarkestportionofyourlogoareainordertomakespeciallogocontour.Ad-
justthelumakeylevelwith◄►+ENTER.
  5-3-6 [Back. Color] + ENTER.
 Thisfunctionallowscoloringthe“erasedportions”ofthelogowhenusingthelumakey.Selectalevelwith
◄►+ENTER.
  5-3-7 [Recording time] + ENTER.
 Adjusttherecordingtimewith◄►+ENTER.
  5-3-8 [Store] + ENTER.
  This function allows storing the logo into the memory. The memorization will take few seconds.
5-4  [Record frame] + ENTER. 
  This mode allows storing up to 4 frames in order to display them at any time during the show. 
  5-4-1  [H position] + ENTER.
 AdjusttheHorizontalpositionoftheframeareawith◄►+ENTER.
  5-4-2  [V position] + ENTER.
 AdjusttheVerticalpositionoftheframeareawith◄►+ENTER.
  5-4-3  [H size] + ENTER.
 AdjusttheHorizontalsizeoftheframeareawith◄►+ENTER.
  5-4-4  [V size] + ENTER.
 AdjusttheVerticalsizeoftheframeareawith◄►+ENTER.
  5-4-5  [Luma key level] + ENTER.
 Thisfunctionallows“erasing”thedarkestportionofyourframeinordertomakespecialframecontour.Adjust
thelumakeylevelwith◄►+ENTER.
  5-4-6 [Store]
 Thisfunctionallowsstoringthedisplayedimage(frame)intoaoneofthe4memories.PressesENTERtostart
the memorization of the frame. The memorization will take about 2 minutes.
5-5  [Erase logo] + ENTER. 
 Thisfunctionallowserasingthememorizedlogos.Selectanitemwith◄►+ENTER.
5-6  [Erase frame] + ENTER. 
 Thisfunctionallowserasingthememorizedframes.Selectanitemwith◄►+ENTER.
PAGE 32










