Owner's manual
D. COMMANDS AND RESPONSES TABLE
CD  RESPONSE  COMMAND DESCRIPTION 
TYPE
     VALUE
 MIN MAX  DESCRIPTION
SELECTION COMMANDS
CC CC MAINselectedinput.  Rd 0 12 1=input#1 2=input#2
CN CN Backgroundselection(PIPeffectonly) Rd/Wr 0 8 3=input#3 4=input#4
cc cc PREVIEWselectedinput(readonly). Rd 0 8 5=input#5 6=input#6
cn cn Inputpre-selectionorPIPswitching Rd/Wr 0 8 7=input#7 8=input#8
         9=frame#1 10=frame#2
 11 = frame #3
OB OB BlackscreenontheMAINoutput Rd/Wr 0 1 1=blackoutput
ob ob BlackscreenonthePREVIEWoutput Rd/Wr 0 1 1=blackoutput
TK TK TAKE(transition).   Rd/Wr 0 1 1=startthetransition(automaticresetattheendofthe
effect duration).
         0=stopthetransition(forholdingeffect).
TV TV Transitionavailability.  Rd 0 1 1=Newinputreadytocommute.
FZ FZ FREEZEMAIN.   Rd/Wr 0 1 0=inactive 1=active.
fz fz FREEZEPREVIEW.  Rd/Wr 0 1 0=inactive 1=active.
INPUT COMMANDS
PC PC Inputselectionforadjustment. Rd/Wr 0 8 0=allinputs. 1=input#1.... 8=input#8
PE PE Inputdisabling(workswithPC) Rd/Wr 0 1 0=disable 1=enable.
PL PL Hsyncloadselection(workswithPC). Rd/Wr 0 1 0=Hi-Zload 1=75Ωload.
PR  PR  RGB input type selection 
  (workswithPCcommand).  Rd/Wr 0 10 0=composite 1=S.VIDEO
 2 = YUV   3 = RGBS (TTL)
 4 = RGsB (SOG)   5 = RGBS (ana)
                  6 = computer (SOG) 7 = comp (HV or C.)
         8=computerDVI 9=HDTVYUV
         10=audioonly
PI  PI  Input standard selection 
  (workswithPCcommand).  Rd/Wr 0 4 0=NTSC/PAL/SECAM.
         1=NTSC. 2=PAL.
 3 = SECAM   4 = Black & White.
PP PP VCRmode   Rd/Wr 0 1 0=OFF 1=ON.
OUTPUT COMMANDS
XR XR Switchingmodeselection.  Rd/Wr 0 10 0=internalrate 1=followinput#1
                  2 = follow input #2...  8 = follow input #8
         9=seamless#1 10=seamless#8
OF OF Outputformatsselection.  Rd/Wr 0 9 0=800x6004/3 1=1024x7684/3
         2=1280x10244/3 3=1400x10504/3
         4=1600x12004/3 5=852x48016/9
         6=1280x72016/9 7=1280x76816/9
         8=1366x76816/9 9=1080p16/9
OR OR Outputrateselection.  Rd/Wr 0 3 0=50Hz1=60Hz
 2 = 72 Hz 3 = 75 Hz
OY OY Outputsyncselection(M).  Rd/Wr 0 2 0=H&Vsync. 1=Compositesync.
oy oy Outputsyncselection(P).  Rd/Wr 0 2 2=SOG
OS OS Typeofscreenselection  Rd/Wr 0 1 0=4/3screen 1=16/9screen
OP OP Testpatternselection(M).  Rd/Wr 0 5 0=nopattern 1=centering 2=color
op pop Testpatternselection(P).  Rd/Wr 0 5 3=greyscale 4=grid.  5=burst
NOTE :  (M) = MAIN output.   Rd/Wr = Read and write command.  (P) = PREVIEW output.  Rd = Read only command.
PAGE 45










