Owner's manual
CD  RESPONSE  COMMAND DESCRIPTION    TYPE
VALUE
MIN  MAX DESCRIPTION
FRAME & LOGOS COMMANDS 
LM LM Frame/logomode.   Rd/Wr 0 3 0=use&assignmentmode.
 1 = logo recording mode.
 2 = animated logo recording mode
 3 = frame recording mode.
 4 = erasing logo mode.
 5 = erasing frame mode.
 6 = logo transfer mode.
LX LX Statusofthelogoprogrammer  Rd 0 4 0=free.
 1 = logo/frame in recalling process.
 2 = logo/frame in storing process.
 3 = output format incompatible with the logo.
 4 = logo/frame in erasing process.
LA LA Logoindex#1assignment.  Rd/Wr 0 9 0=nologo
 1 = logo 1...  8 = logo 8
         9=animatedlogo
LB LB Logoindex#2assignment.  Rd/Wr 0 9
LF LF Frameassignment.   Rd/Wr 0 4 0=noframe
 1 = frame 1  2 = frame 2
 3 = frame 3  4 = frame 4
LC  LC  • In logo recording mode : 
    number of the logo to be store (1 to 8).
    • In frame recording mode : 
  numberoftheframetobestore(1to4). Rd/Wr 0 8 Inerasemode:0=eraseall
    • In erase logo mode : 
    number of the logo to be erase (1 to 8)
    • In erase frame mode : 
    number of the frame to be erase (1 to 4). 
LD LD Displaylogo(accordingtoPCH) Rd/Wr 0 1 0=DisplayOFF  1=DisplayON
LU LU Horiz.positionofthelogostoringarea. Rd/Wr 0 255
Lu Lu Vert.positionofthelogostoringarea. Rd/Wr 0 255
LK LK Horizontalsizeofthelogostoringarea. Rd/Wr 5 255 5=3%   255=100%
Lk Lk Verticalsizeofthelogostoringarea. Rd/Wr 5 255 5=3%   255=100%
LQ LQ Pixelsnumberinalineofthestoringarea.Rd 0 65535
Lq Lq Linesnumberofthestoringarea. Rd 0 65535
LH LH Horizontalpositionofthelogo1(M). Rd/Wr 0 255
LV LV Verticalpositionofthelogo1(M). Rd/Wr 0 255
LW LW Logo1horiz.size%outputformat(M). Rd 5 255 5=3%   255=100%
LS LS Logo1vert.size%outputformat(M). Rd 5 255 5=3%   255=100%
LT LT Logo1type(M).   Rd 0 2 0=incrustinglogo
 1 = cutting logo 
 2 = animating logo
LP LP Pixelsnumberinalineoflogo1(M). Rd 0 65535 These2commandsallowcalculatingthedurationofthestoring.
LL LL Linesnumberinalogo1(M).  Rd 0 65535
Lh Lh Horizontalpositionofthelogo2(M). Rd/Wr 0 255
Lv Lv Verticalpositionofthelogo2(M). Rd 0 255
Lw Lw Logo2horiz.size%outputformat(M) Rd 5 255 5=3%   255=100%
Ls Ls Logo2vert.size%outputformat(M) Rd 5 255 5=3%   255=100%
Lt Lt Logo2type(M).   Rd 0 2 0=incrustinglogo
 1 = cutting logo
 2 = animating logo
Lp Lp Pixelsnumberinalineoflogo2(M). Rd 0 65535 These2commandsallowcalculatingthedurationofthestoring.
Ll Ll Linesnumberinalogo2(M).  Rd 0 65535
LN LN Pixelsnumberinalineofaframe(M) Rd 0 65535
Ln Ln Linenumberofaframe(M).  Rd 0 65535
NOTE :  (M) = MAIN output.   Rd/Wr = Read and write command.  (P) = PREVIEW output.  Rd = Read only command.
PAGE 48










