Owner's manual

ManualsBrandsAnalog Way ManualsAccessories communicationQuattro Value

CD RESPONSE COMMAND DESCRIPTION TYPE

VALUE

MIN MAX DESCRIPTION

STATUS COMMANDS

UN UN MeasuresunityintensofkHz. Rd 0 65535 ex:14500=145MHz

IL IL Horizontalperiodofinputsignal(M) Rd 0 65535 Linefrequency(inkHz)=(UNVALUE)x10÷ (IL VALUE).

il il Horizontalperiodofinputsignal(P) Rd 0 65535 Linefrequency(inkHz)=(UNVALUE)x10÷ (il VALUE).

ID ID Verticalperiodofinputsignal(M) Rd 0 65535 Framefrequency(inHz)=(LinefrequencyinHz)÷ (ID VALUE).

id id Verticalperiodofinputsignal(P) Rd 0 65535 Framefrequency(inHz)=(LinefrequencyinHz)÷ (id VALUE).

IP IP InputSync.detection(M).  Rd 0 1 0=noSync.detected 1=Sync.detected.

ip ip InputSync.detection(P).  Rd 0 1 0=noSync.detected 1=Sync.detected.

IH IH SignofthehorizontalinputSync.(M) Rd 0 1 0=negative  1=positive.

ih ih SignofthehorizontalinputSync.(P) Rd 0 1 0=negative  1=positive.

IV IV SignoftheverticalinputSync.(M) Rd 0 1 0=negative  1=positive.

iv iv SignoftheverticalinputSync.(P) Rd 0 1 0=negative  1=positive.

         0=SeparateH&Vsync.

IK IK InputSynctypedetection(M). Rd 0 3 1=Compositesync.(TTL).

ik ik InputSynctypedetection(P). Rd 0 3 2=SOG(Sync.OnGreen).

3 = Composite sync. (analog).

II II Interlacedsignaldetection(M). Rd 0 1 0=notinterlaced  1=interlaced.

ii ii Interlacedsignaldetection(P). Rd 0 1 0=notinterlaced  1=interlaced.

IO IO "Outofrange"signaldetection(M). Rd 0 1 0=Inrange  1=Outofrange.

io io "Outofrange"signaldetection(P). Rd 0 1 0=Inrange  1=Outofrange.

         0=nosignal  1=wrongsignal

         2=NTSCstd(3.58/60) 3=PALstd(4.43/50)

         4=SECAM(50Hz) 5=B&W(50Hz)

         6=B&W(60Hz)  7=YUV50Hz

         8=YUV60Hz  9=RGB50Hz

         10=RGB60Hz  11=640x480

IF IF Standardinputsignaldetection(M). Rd 0 35 12=800x600  13=1024x768

         14=1280x1024  15=1400x1050

         16=1600x1200  17=852x480

if if Standardinputsignaldetection(P). Rd 0 35 18=1280x720  19=1280x768

         20=1366x768  21=1680x1050

         22=1920x1080  23=1080i50

         24=1080i60  25=720p50

         26=720p60  26=1080p24

         28=1080p25  29=1080p30

         30=1080p50  31=1080p60

         32=1080sf24  33=480p50

         34=480p60  35=480p72

XA XA Synchronizedinput.  Rd 0 8 IdenticalasXRcommand.

XF XF Synchronizedinputstandard(M). Rd 0 29 IdenticalasIFcommand.

XT REFT Frame frequency of the synchro-

  nizedinput(M).   Rd 0 65535 ValueinhundredthofHz.

OTHERS COMMANDS

TP TP T-BARposition.   Rd/Wr 0 255

TB TB Executedpercentageoftheeffect. Rd 0 65535 0=0%   65535=100%

? DEV Devicetype.   Rd 0 65535

# #1,....#0 Sendalldeviceparameters.  Rd  

NOTE : (M) = MAIN output. Rd/Wr = Read and write command. (P) = PREVIEW output. Rd = Read only command.

PAGE 51