X Instruction Manual





 select to set the output types and resoluons of Output #1  select to set the output types and resoluons of Output #2  select to congure the 8 individual input types and resoluons  select to store and use presets  select to change source image sengs of an input  select to access keying and tling controls and parameters when video
layer is selected
 setup your background color and your Quick Frame  select to adjust layer size, posion, border, transparency or transions  select to store (record), use and manage logos and frames into the Quick-
MatriX
select to access all audio input and output parameters  select to access device soware informaon, LAN sengs, reset factory set-
ngs, amongst other user oriented funcons (see next page)
 Select an .  Select an .  Select an  (open/close)  Press  to view the result on the Program
 Press the  buon from the Home menu (all
funcons must be conrmed by the  buon)
 Select   Select and then the  On Format line, select the display’s nave resoluon  Control or adjust your display device (Monitor or Video
Projector)
 If necessary, select  in the Output menu.
 Press the  buon from the Home menu (all funcons must be conrmed by the Enter buon)  Press and   If the acquision is successful the source appears on Preview.  If the acquision has failed, check all connecons and perform
a manual setup
 For a comprehensive Input Setup, please refer to user’s
Manual
 For a manual input setup, press the  buon:
a) Press , b) Select the right input from Input #1 up to SDI #2, then c) Select , d) Select  and choose the input type.

 

#1 = Source is on the Program output #2 = Freeze enable
  
#1 = Source is on Preview #2 = Funcon available for modicaon #3 = Current output on Matrix mode
Layer/source selected or is currently acve on the Program output
Layer/source selected or is not currently acve on the Program output
To adjust layer Size or Pos, use the Layer Menus. To adjust Blanking, use the Auto Centering or Blanking adjustments in the Image menu.
 Inputs #1 to #4 : balanced & unbalanced connecon
Inputs #1 & #2: DVI embedded audio HDMI Inputs #3 & #4: DVI and HDMI embedded audio HDMI Inputs SPDIF #1 and #2: digital audio inputs Inputs HDMI #1 and #2: embedded audio HDMI Inputs SDI #1 to #2: embedded audio SDI Outputs #1 and #2: balanced & unbalanced connecon Outputs SPDIF #1 and #2: digital audio outputs
L+
L-
R+
R-
UNBALANCED
Left
Right
GROUND
GROUND GROUND
L+
L-
R+
R-
BALANCED
L+ R+ L- R-
GROUND(S)