SCAN 1600 / DIGI SCAN 1600
PAGE 14
Chapter 3 : FRONT PANEL DISPLAY MENU DESCRIPTION
3-1. INTRODUCTION
The front panel display menu presents 2 modes: the STATUS MODE and the CONTROL MODE.
The STATUS MODE indicates the input and output status of the device.
The CONTROL MODE allows selecting and adjusting the parameters of the device.
3-2. CONTROL BUTTONS
The front panel display is controlled by 2 buttons and 1 knob:
knob: In the CONTROL MODE, turn this knob to scroll thru the different menus.
ENTER button: From the STATUS MODE, press this button to enter in the CONTROL MODE.
From the CONTROL MODE, press this button to confirm a selected item.
EXIT / MENU button: From the STATUS MODE, press this button to enter in the CONTROL MODE.
From the CONTROL MODE, press this button to:
- return to the previous menu without safeguarding the selection.
- return to the STATUS MODE (press several times).
3-3. STATUS MODE
When switching ON, the front panel display shows the product's name and firmware versions as follows:
DEVICE MODEL DSV1600 DEVICE STATUS
DEVICE VERSION Version _._
Input : SVGA c INPUT STATUS
H = 37.9K V= 60 Hz d
Output : NTSC e OUTPUT STATUS
Internal 59.94 f
c INPUT FORMAT
d HORIZONTAL FREQUENCY (in kHz) / VERTICAL FREQUENCY (in Hz).
e OUTPUT STANDARD.
f OUTPUT RATE TYPE / OUTPUT FREQUENCY