User`s manual

SCAN 1600 / DIGI SCAN 1600 Chapter 6 : TECHNICAL SPECIFICATIONS
PAGE 23
6-2. VIDEO OUTPUTS (continued)
• COMPOSITE VIDEO
Connector: BNC female.
Standard: PAL : 15.625 kHz / 50 Hz - 625 lines.
NTSC : 15.734 kHz / 60 Hz - 525 lines - 7.5 IRE.
NTSC J : 15.734 kHz / 60 Hz - 525 lines - 0 IRE.
Level: 1 Vp/p (0.7 V Luma + 0.3 V Sync.).
Impedance: 75 Ohm.
• SDI (available on the DSV1600 only)
Connector: BNC female.
Signal: 270 Mbps serial digital output according to SMPTE 259M.
Impedance: 75 Ohm.
6-3. GENLOCK
Connectors: 2 BNC female.
Input signal type: Black Burst PAL or NTSC.
Impedance: 75 Ohm or Hi-Z.
Output: Passive loop-through.
6-4. REMOTE PORT
Connector: DB9 female.
Level: RS-232.
Data Rate: 9600 bauds, 8 bits data, 1 bit stop, no parity bit, no flow control.
6-5. ENVIRONMENTAL
Power Supply: DSV1600 : 100VAC-250VAC ; 50-60Hz ; I = 0.5A Max.
SSV1600 : External adapter (CE / UL / CSA / IEC950 approved)
Input (AC): 100-240 VAC, 1 A, 50-60 Hz.
Output (DC): 5 V, 4A, 20 W max.
Storage Temperature: - 25 °C to + 85 °C (- 13 °F to + 185 °F)
Operating temperature: 0 °C to + 50 °C (32 °F to 122 °F)
Hygrometry: 10% to 80% (without condensation)
Dimensions: Compatible with the 19" standard, height = 1 unit.
DSV1600: W 482 mm (19”) x D 265 mm (10.4”) x H 44 mm (1.74”).
SSV1600: W 221 mm (8.7”) x D 265 mm (10.4”) x H 43 mm (1.69”).
Weight: DSV1600: 3 kg (6.6 Lbs).
SSV1600: 1.2 kg (2.64 Lbs)