Manual

RUNNING SHOT BOX FOR LIVECORE™ SERIES
DIAGRAM
Once your SB-80 Shot Box device detected and a connecon to the LiveCore™ switcher
established, each individual key LED backlight will reect the corresponding Master Preset
or Screen Preset availability on the system as well as the corresponding Monitoring Preset
availability.
The SB-80 Shot Box supports 140 Master Presets or 140 Screen Presets in total (2 pages
of 70 Master Presets or Screen Presets depending on your conguraon) and 8 Monitoring
Presets (2 pages of 4 Monitoring Presets).
For more informaon about Master Presets, Screen Presets and Monitoring Presets, please
refer to your LiveCore™ product manual.
To switch from one page to the other (and vice versa), simply press the PAGE key on the
SB-80 Shot Box device. Blue backlighng indicates Page 1. Red backlighng indicates
Page 2. If a Master Preset or a Screen Preset key backlight is turned o, this means that
the corresponding Master Preset or Screen Preset memory is empty. If a Monitoring Preset
key backlight is turned o, this means that the corresponding Monitoring Preset memory
is empty.
To recall a Master Preset or a Screen Preset from memory into your Preview monitor, press
the corresponding key on your SB-80 Shot Box device. The key backlight starts blinking.
To recall a Monitoring Preset from memory, press the corresponding key on your SB-80 Shot
Box device.
To send the current Preview conguraon to the Program output, press the TAKE key on the
SB-80 Shot Box device.
The Master Preset or Screen Preset key illuminates in contrasng color aer the TAKE to
indicate that this preset has been selected on program.
WARNING!
Connect the Shot Box USB cable directly
to your computer - Do not connect the
Shot Box USB cable on the front of your
LiveCore™ series device.