User Manual

The STE200 offers a wide variety of transitions

between the scenes you create for your shows

and events. It allows for live recall of 8 user

presets, each of which you can edit at any given

time.

1. In the Layer Selection section, click on

the PIP1 button. On your Preview screen,

PIP1 will appear as a color rectangle. The

parameters of the layer will automatically

appear in the RCS Preview section.

2. At the bottom of the Preview section, click on

the Transition tab, then select the transition

type from the left dropdown menu, and the effect behaviour from the right dropdown menu.

3. Determine effect duration by sliding the duration bar left (shorter) or right (longer), or by manually setting the

value in the duration value box.

4. Repeat the procedure in the Closing Effect tab to determine the way your layer will close.

5. Select a source and use the [TAKE] button to see the result on Main screen.

The STE200 allows the creation of user

dened presets very easily. Any setup you have

congured on screen, can be stored into one of

the 8 available user presets.

1. After having congured layers, PIP transitions,

logos... on your screen (see “Working with the

RCS” chapter, p. 58), click on one of the 8

available Preset buttons.

2. In the dropdown menu, choose Save From

Main or Save From Preview to determine

which screen you want to memorize the

preset from.

3. By clicking one of the two options, the RCS will automatically load and preview the selected Preset.

4. Click on the [TAKE] button to view your preset on the Main screen.

Using the RCS: Transitions & effects

Creating Presets