User Manual

The Smart MatriX LE offers a wide variety of

transitions between the scenes you create for your

shows and events. It allows for live recall of 4 user

presets, each of which you can edit at any given time.

1. In the Layer Selection section, click the PIP1

button. On your Preview screen, PIP1 will appear

as a color rectangle. The parameters of the layer

will automatically appear in the RCS Preview

section.

2. At the bottom of the Preview section, click on the

Transition tab, then select the transition type from

the left dropdown menu, and the effect behaviour

from the right dropdown menu.

3. Determine effect duration by sliding the duration bar left (shorter) or right (longer), or by manually setting

the value in the duration value box.

4. Repeat the procedure in the Closing Effect tab to determine the way your layer will close.

Layer transitions & effects

Creating Presets

The Smart MatriX LE allows the creation of user

dened presets very easily. Any setup you have

congured on screen, can be stored into one of the 4

available user presets.

1. After having congured layers, PIP transitions,

logos... on your screen (see “Working with the

RCS” chapter, p. 43), click on one of the four

available Preset buttons.

2. In the dropdown menu, choose Save From Main

or Save From Preview to determine which screen

you want to memorize the preset from.

3. By clicking one of the two options, the RCS will automatically load and preview the selected Preset.

4. Click on the Take button to view your preset on the Main screen.

For titling or DSK Mode, it is important to proceed through the following steps:

PIP 1 --

Source --

Keying

The SMX100 does not display a PIP without keying. The result is a display to black.