User Manual
Smart MatriX LE - Ref. SMX100
Front Panel Description
EXIT/MENU: Home Menu or back one level
ENTER: Validates the menu or command
Select a custom transition
Recall a custom stored preset
(4 memories available)
#1 to #6: Press to access analog source #1 to #6
DVI 1 to DVI 2: Press to access DVI #1 or DVI #2
SDI 1 to SDI 2: Press to access SDI #1 or SDI #2
BLACK: Clear the active layer
OUTPUT #1 & #2: Select the output #1 or #2,
select a source, then press TAKE
Hold for 3 seconds for stand-by Mode
Freeze the input linked to the current layer on MAIN
CONTROL
EFFEECT
PRESET
INPUT SELECTION
OUTPUT SELECTION
STAND-BY
FREEZE
O U T P U T S E T U P
1- Press the EXIT/MENU button from the Home menu
[all functions must be conrmed by the ENTER button]
2- Press [Output]
3- Press [Output format]
4- On [Format] line, select the display’s native resolution
5- Control or adjust your display device (Monitor or Video
Projector
6- If necessary, select [Test Pattern] in the Output menu
I N P U T S E T U P
1- Press the EXIT/MENU button from the Home menu [all functions must be
conrmed by the Enter button]
2- Press [Input] and [Autoset ALL]
3- If the acquisition has failed, check all connections and perform a manual setup
4- For a comprehensive Input Setup, please refer to user’s Manual
5- For a manual input setup, press the EXIT/MENU button:
a) Press [Input],
b) Select the right input from Input #1 up to SDI #2, then
c) Select [Type].
NOTE: To adjust input Size or Pos, use the [Layer] Menus.
To adjust Blanking, use the Auto-Centering or Blanking adjustments in the
Image menu.
Transition the pre-selected sources onto
the MAIN output with the selected effects
TAKE
B U T T O N C O L O R U S A G E
#1 = Source is on one of the outputs
Solid red: #2 = Freeze enable
#3 = Stand-by button
#4 = Preset Selection
Solid green: #1 = Source is on Preview
#2 = Function available for modication
Blinking red: Layer/source selected, and is currently active on
one of the outputs
Blinking green: Layer/source selected, and is not currently active
one one of the outputs